General Data |
Manufacturer (OEM) | FSP |
PCB Type | Double Sided |
Primary Side |
Transient Filter | 4x Y caps, 2x X caps, 3x CM chokes, 1x MOV |
Inrush Protection | NTC Thermistor & Relay |
Bridge Rectifier(s) | 1x HY GBJ2506P (600V, 25A @ 100°C) |
APFC MOSFETS | 2x ROHM R6020KNX (600V, 20A, 0.196Ohm) |
APFC Boost Diode | 1x ROHM SCS306AM (650V, 6A @ 120°C) |
Hold-up Cap(s) | 1x Rubycon (450V, 390uF, 3,000h @ 105°C, MXG) |
Main Switchers | 1x Infineon IPA80R310CE (800V, 10.6A @ 100°C, 0.31Ohm) |
Reset Switch | 1x Infineon IPD80R1K4CE (800V, 2.3A @ 100°C, 1.4Ohm) |
APFC/Switching Controller | FSP 6600 IC |
Topology | Primary side: Active Clamp Reset Forward Secondary side: Synchronous Rectification & DC-DC converters |
Secondary Side |
+12V MOSFETS | 4x Infineon IPP029N06N (60V, 100A @ 100°C, 2.9mOhm) |
5V & 3.3V | DC-DC Converters:4x Infineon BSC042N03LS (30V, 59A @ 100°C, 4.2mOhm) PWM Controllers: ANPEC APW7159C |
Filtering Capacitors | Electrolytics: 2x Nippon Chemi-Con (1-5,000 @ 105°C, KZE), 2x Rubycon (3-6,000 @ 105°C, YXG), 1x Rubycon (4-10,000 @ 105°C, YXF) Polymers: 15x United Chemi-Con |
Supervisor IC | Weltrend WT7527 (OCP, OVP, UVP, SCP, PG) |
Fan Model | Protechnic Electric MGA13512HF-A25 (135mm, 12V, 0.28A, Fluid Dynamic Bearing Fan) |
5VSB Circuit |
Rectifier | 1x CET CEF02N7G FET (700V, 1.3A @ 100°C, 6.75Ohm) |
Standby PWM Controller | FSP 6601 IC |