Cybenetics Test - Thermaltake Toughpower Grand RGB 750W

Thermaltake Toughpower Grand RGB 750W

PSTPG0750FPCGUSRMV000013

Lab ID52

Report:
Receipt Date: Feb 6, 2017
Test Date: Feb 10, 2017
Report Date: Feb 13, 2017

	115V	230V
Wirkungsgrad

115V	230V
		Lautstärkeklasse

Aristeidis Bitziopoulos, Laboratory General Manager

General Information

	Thermaltake
Hersteller (OEM)	Sirfa / High Power
	Toughpower Grand RGB
	TPG-0750F-R
	PSTPG0750FPCGUSRMV000013

(Vrms)	100-240
(Arms)	10
(Hz)	50-60
(W)	750
	ATX12V
	140mm HDB RGB Fan (TT-1425/A1425L12S)
	✓
	Fully Modular

Rail		3.3V	5V	12V	5VSB	-12V
Max. Power	Amps	22	22	62.5	3	0.3
Max. Power	Watts	120		750	15	3.6
Total Max. Power (W)		750

Electronic Loads	Chroma 6314A x2 63123A x6 63102A 63101A	Chroma 63601-5 x2 Chroma 63600-2 63640-80-80 x10 63610-80-20
AC Sources	Chroma 6530, Chroma 61604
Power Analyzers	N4L PPA1530, N4L PPA5530
Oscilloscopes	Picoscope 4444 & 3424, Keysight DSOX3024A, Rigol DS2072A
Voltmeter	Keithley 2015 THD 6.5 Digit
Sound Analyzer	Bruel & Kjaer 2250-L G4
Microphone	Bruel & Kjaer Type 4189
Data Loggers	Picoscope TC-08 x2, Labjack U3-HV x2
Testing Methodology	Cybenetics PSU Test Protocol

Modular Cables
Description	Cable Count	Connector Count (Total)	Gauge
ATX connector 20+4 pin (600mm)	1	1	18AWG
4+4 pin EPS12V (650mm)	1	1	16AWG
6+2 pin PCIe (500mm+150mm)	2	4	16-18AWG
SATA (500mm+150mm+150mm)	3	9	18AWG
4 pin Molex (500mm+150mm+150mm+150mm)	1	4	18AWG
FDD Adapter (+150mm)	1	1	22AWG

Parts Description

General Data
Manufacturer (OEM)	Sirfa/High Power
Primary Side
Transient Filter	4x Y caps, 2x X caps, 2x CM chokes, 1x MOV, 1x CMD02X
Inrush Protection	-
Bridge Rectifier(s)	1x GBJ1506 (600V, 15A @ 100 °C)
APFC MOSFETS	2x Toshiba TK16A60W (600V, 15.8A @ 150°C, 0.16Ohm)
APFC Boost Diode	1x Infineon IDH06G65C5 (650V, 6A @ 145°C)
Hold-up Cap(s)	1x Rubycon (400V, 680uF, 2000h @ 105 °C, MXH)
Main Switchers	2x Toshiba TK16A60W (600V, 15.8A @ 150°C, 0.16Ohm)
APFC Controller	Infineon ICE3PCS01
Switching Controller	Infineon ICE2HS01G
Topology	Primary side: Half-Bridge & LLC Resonant Controller Secondary side: Synchronous Rectification & DC-DC converters
Secondary Side
+12V MOSFETS	4x Infineon IPP041N04N G (40V, 80A @ 100 °C, 4.1mohm)
5V & 3.3V	DC-DC Converters: 8x Infineon IPD060N03L (30V, 50A @ 100 °C, 6 mohm) PWM Controller: APW7159
Filtering Capacitors	Electrolytics: Nippon Chemi-Con (105 °C, KY, KZE) Polymers: Nippon Chemi-Con
Supervisor IC	SITI PS223 (OVP, UVP, OCP, SCP, OTP)
Fan Model	Thermaltake TT-1425 (Hong Sheng OEM, A1425L12S, 140mm, 12V, 0.30A, 1450 RPM, hydro-dynamic bearing)
5VSB Circuit
Rectifier	2x IPD060N03L FETs (30V, 50A @ 100°C, 6mohm)
Standby PWM Controller	Sanken STR-A6069H
-12V Circuit
Rectifier	KIA7912PI

Test Results

Temperature & Compliance Info

(°C /°F)	30-32 / 86-89.6
	✓
	✓

Performance Summary 115V

Wirkungsgrad	PLATINUM
Lautstärkeklasse	Standard+
(>1450 load combinations)	89.827%
Average Noise Output (>1450 Load Combinations)	36.86dBA
(>1450 Load Combinations)	0.993
Efficiency With 10W (≤500W) or 2% (>500W) Load	0.000%
	0.0780W
12V Ripple (Full Load)	22.19mV
5V Ripple (Full Load)	13.79mV
3.3V Ripple (Full Load)	7.84mV
5VSB Ripple (Full Load)	8.39mV
12V Load Regulation	1.57%
5V Load Regulation	1.18%
3.3V Load Regulation	2.77%
5VSB Load Regulation	2.68%
Inrush Current	0.000A

Hold-Up Time (ms)	18.2
AC Loss to PWR_OK Hold Up Time (ms)	15.9
PWR_OK Inactive to DC Loss Delay (ms)	2.3

Stromverbrauch im Ruhezustand

Tables 115V

Graphs 115V

This graph is generated by the PPA Standby Power Analysis software which takes full control of the power analyzer during the whole procedure. This application features all of the EN50564 & IEC62301 test limits for standby power software testing.

115V

This graph depicts the PSU`s efficiency throughout its entire operational range. For the generation of the efficiency and noise graphs we set our loaders to auto mode through our custom-made software before trying thousands of possible load combinations.

115V

The PSU`s noise in its entire operational range and under 30-32 °C ambient is depicted in this graph. The X axis represents the load on the +12V rail(s) while the Y axis is the load on the minor rails.

Indicative Performance

The PSU`s efficiency under high ambient temperatures with 115V and 230V input. For this graph the results of the 10-110% load regulation table are used.

This graph depicts the efficiency levels of the 5VSB rail with 115V and 230V input.

115V

Test #	5VSB	DC/AC (Watts)	Efficiency	PF/AC Volts
1	0.047A	0.241	66.759%	0.053
1	5.123V	0.361	66.759%	115.10V
2	0.092A	0.471	72.685%	0.091
2	5.121V	0.648	72.685%	115.10V
3	0.552A	2.817	81.135%	0.272
3	5.104V	3.472	81.135%	115.11V
4	3.002A	15.043	79.475%	0.380
4	5.011V	18.928	79.475%	115.09V

Supplementary Tests (For Reference)

115V

Test #	12V	5V	3.3V	5VSB	DC/AC (Watts)	Efficiency	Fan Speed (RPM)	Fan Noise (dB[A])	Temps (In/Out)	PF/AC Volts
1	4.354A	1.962A	1.967A	0.986A	74.784	88.807%	0	0	41.88°C	0.970
1	12.224V	5.088V	3.350V	5.058V	84.210	88.807%	0	0	39.03°C	115.15V
2	9.746A	2.948A	2.961A	1.185A	149.750	90.984%	1240	39.9	38.73°C	0.986
2	12.201V	5.079V	3.339V	5.045V	164.589	90.984%	1240	39.9	41.25°C	115.13V
3	15.506A	3.453A	3.477A	1.391A	224.948	91.982%	1290	40.2	39.01°C	0.995
3	12.180V	5.070V	3.330V	5.032V	244.557	91.982%	1290	40.2	41.85°C	115.06V
4	21.266A	3.946A	3.971A	1.590A	299.747	91.859%	1295	40.3	39.68°C	0.997
4	12.160V	5.064V	3.321V	5.020V	326.312	91.859%	1295	40.3	42.72°C	115.21V
5	26.708A	4.946A	4.980A	1.797A	374.752	91.399%	1335	41.5	40.67°C	0.996
5	12.140V	5.059V	3.312V	5.009V	410.016	91.399%	1335	41.5	43.64°C	115.05V
6	32.168A	5.930A	5.996A	1.998A	449.667	90.796%	1405	42.7	42.22°C	0.996
6	12.121V	5.054V	3.302V	5.000V	495.249	90.796%	1405	42.7	46.00°C	115.06V
7	37.651A	6.935A	7.013A	2.200A	524.664	90.125%	1435	42.9	42.73°C	0.997
7	12.100V	5.049V	3.293V	4.990V	582.154	90.125%	1435	42.9	47.54°C	115.22V
8	43.142A	7.930A	8.039A	2.407A	599.569	89.342%	1450	43.5	43.65°C	0.997
8	12.081V	5.043V	3.283V	4.980V	671.093	89.342%	1450	43.5	49.33°C	115.26V
9	49.090A	8.445A	8.583A	2.410A	674.646	88.522%	1450	43.5	44.59°C	0.998
9	12.060V	5.036V	3.274V	4.975V	762.126	88.522%	1450	43.5	51.47°C	115.30V
10	54.798A	8.952A	9.097A	3.033A	749.475	87.610%	1450	43.5	45.54°C	0.998
10	12.040V	5.029V	3.263V	4.947V	855.468	87.610%	1450	43.5	53.75°C	115.16V
11	61.127A	8.970A	9.123A	3.035A	824.401	86.652%	1450	43.5	45.77°C	0.998
11	12.019V	5.020V	3.255V	4.939V	951.388	86.652%	1450	43.5	54.97°C	115.08V
CL1	0.100A	14.023A	14.004A	0.004A	119.476	84.744%	1380	42.5	42.82°C	0.986
CL1	12.209V	5.109V	3.327V	5.147V	140.984	84.744%	1380	42.5	47.07°C	115.09V
CL2	62.453A	1.002A	1.002A	1.002A	764.988	88.188%	1450	43.5	44.47°C	0.998
CL2	12.036V	5.012V	3.282V	4.983V	867.450	88.188%	1450	43.5	52.10°C	115.07V

The results above are not used in the certification process

115V

Test #	12V	5V	3.3V	5VSB	DC/AC (Watts)	Efficiency	Fan Speed (RPM)	Fan Noise (dB[A])	PF/AC Volts
1	1.193A	0.491A	0.474A	0.196A	19.69	72.919%	0	0	0.888
1	12.237V	5.090V	3.360V	5.083V	27.00	72.919%	0	0	115.03V
2	2.412A	0.978A	0.981A	0.391A	39.76	83.438%	0	0	0.940
2	12.232V	5.089V	3.356V	5.076V	47.65	83.438%	0	0	115.03V
3	3.635A	1.466A	1.488A	5.070A	59.89	87.484%	0	0	0.961
3	12.227V	5.088V	3.353V	5.070V	68.46	87.484%	0	0	115.04V
4	4.846A	1.963A	1.967A	0.787A	79.79	89.377%	0	0	0.974
4	12.222V	5.087V	3.350V	5.064V	89.27	89.377%	0	0	115.08V

The results above are not used in the certification process

115V

Test	12V	5V	3.3V	5VSB	Pass/Fail
10% Load	5.3 mV	4.8 mV	4.5 mV	4.2 mV	Pass
20% Load	6.2 mV	5.3 mV	4.7 mV	4.5 mV	Pass
30% Load	7.7 mV	5.5 mV	5.5 mV	4.2 mV	Pass
40% Load	9.5 mV	8.6 mV	6.3 mV	6.5 mV	Pass
50% Load	11.0 mV	9.5 mV	6.9 mV	7.9 mV	Pass
60% Load	12.9 mV	11.9 mV	6.1 mV	8.9 mV	Pass
70% Load	14.6 mV	11.1 mV	6.8 mV	8.4 mV	Pass
80% Load	15.5 mV	11.4 mV	7.8 mV	8.5 mV	Pass
90% Load	17.1 mV	12.2 mV	7.3 mV	7.5 mV	Pass
100% Load	22.2 mV	13.8 mV	7.8 mV	8.4 mV	Pass
110% Load	26.9 mV	14.0 mV	9.3 mV	10.1 mV	Pass
Crossload 1	6.6 mV	6.3 mV	6.1 mV	4.9 mV	Pass
Crossload 2	21.9 mV	10.6 mV	7.4 mV	6.4 mV	Pass

The results above are not used in the certification process

Thermaltake Toughpower Grand RGB 750W

Top side

Power specifications label