Cybenetics Test - SilverStone Nightjar 450W (#2)

SilverStone Nightjar 450W (#2)

DB18160814J450SXL0

Lab ID441

Report: 19PS441A
Receipt Date: Jul 17, 2018
Test Date: Jul 23, 2018
Report Date: Jul 27, 2018

	115V	230V
Wirkungsgrad

115V	230V
		Lautstärkeklasse

Aristeidis Bitziopoulos, Laboratory General Manager

General Information

	SilverStone
Hersteller (OEM)	Enhance Electronics
	Nightjar
	NJ450-SXL
	DB18160814J450SXL0

(Vrms)	100-240
(Arms)	8-4
(Hz)	50-60
(W)	450
	SFX-L
	Fanless

	Fully Modular

Rail		3.3V	5V	12V	5VSB	-12V
Max. Power	Amps	16	15	37.5	2.5	0.3
Max. Power	Watts	80		450	12.5	3.6
Total Max. Power (W)		450

Electronic Loads	Chroma 6314A x2 63123A x6 63102A 63101A	Chroma 63601-5 x4 Chroma 63600-2 x2 63640-80-80 x20 63610-80-20 x2
AC Sources	Chroma 6530, Chroma 61604, Keysight AC6804B
Power Analyzers	N4L PPA1530 x2, N4L PPA5530
Oscilloscopes	Picoscope 4444 & 3424, Keysight DSOX3024A, Rigol DS2072A
Voltmeter	Keithley 2015 THD 6.5 Digit
Sound Analyzer	Bruel & Kjaer 2250-L G4
Microphone	Bruel & Kjaer Type 4955-A, Bruel & Kjaer Type 4189
Data Loggers	Picoscope TC-08 x2, Labjack U3-HV x2
Testing Methodology	Cybenetics PSU Test Protocol

Modular Cables
Description	Cable Count	Connector Count (Total)	Gauge	In Cable Capacitors
ATX connector 20+4 pin (300mm)	1	1	16-22AWG	No
4+4 pin EPS12V (400mm)	1	1	16AWG	No
6+2 pin PCIe (400mm+150mm)	2	4	16-18AWG	No
SATA (300mm+200mm+90mm+90mm)	2	8	18AWG	No
4 pin Molex (300mm+200mm+200mm)	1	3	18AWG	No
FDD Adapter (+105mm)	1	1	22AWG	No
AC Power Cord (1380mm) - C13 coupler	1	1	18AWG	-

Parts Description

General Data
Manufacturer (OEM)	Enhance Electronics
Primary Side
Transient Filter	4x Y caps, 3x X caps, 2x CM chokes, 1x MOV
Inrush Protection	NTC Thermistor
Bridge Rectifier(s)	2x GBU15J (600V, 15A @ 100°C)
APFC MOSFETS	2x Infineon IPL60R104C7 (650V, 15A @ 100°C, 0.104Ohm)
APFC Boost Diode	1x CREE C3D08060A (600V, 8A @ 152°C)
Hold-up Cap(s)	1x Hitachi (450V, 390uF, 2000h @ 105°C, HU)
Main Switchers	2x Infineon IPB50R140CP (550V, 15A @ 100°C, 0.14Ohm) Driver IC: Si8230BD
APFC Controller	ATK AT6101L
Resonant Controller	Champion CM6901T6X
Topology	Primary side: Half-Bridge & LLC Resonant Controller Secondary side: Synchronous Rectification & DC-DC converters
Secondary Side
+12V MOSFETS	8x Infineon BSC014N04LS (40V, 100A @ 100°C, 1.4mOhm)
5V & 3.3V	DC-DC Converters: 4x Infineon BSC018NE2LS (25V, 97A @ 100°C, 1.4mOhm), 2x Infineon BSC050N04LS (40V, 54A @ 100°C, 5mOhm) PWM Controller: 2x Anpec APW7160A
Filtering Capacitors	Polymers: FPCAP, Suncon, Unicon (2000h @ 125°C, UPL, UPH)
Supervisor IC	SITI PS223 (OCP, OTP, OVP, UVP, SCP, PG)
5VSB Circuit
Rectifiers	MOSPEC S10L45 (45V, 10A) , SVF2N70MJ (700V, 2A, 6.5Ohm)
Standby PWM Controller	ATK AT6002H

Test Results

Temperature & Compliance Info

(°C /°F)	30-32 / 86-89.6
	✓
	✓

Performance Summary 115V

Wirkungsgrad	BRONZE
Lautstärkeklasse	A++
(>1450 load combinations)	91.600%
Average Noise Output (>1450 Load Combinations)	6.00dBA
(>1450 Load Combinations)	0.952
Efficiency With 10W (≤500W) or 2% (>500W) Load	63.235%
	0.0539W
12V Ripple (Full Load)	20.31mV
5V Ripple (Full Load)	18.55mV
3.3V Ripple (Full Load)	23.49mV
5VSB Ripple (Full Load)	19.53mV
12V Load Regulation	0.20%
5V Load Regulation	1.37%
3.3V Load Regulation	1.87%
5VSB Load Regulation	2.83%
Inrush Current	84.947A

Hold-Up Time (ms)	13.4
AC Loss to PWR_OK Hold Up Time (ms)	13.9
PWR_OK Inactive to DC Loss Delay (ms)	-0.5

Stromverbrauch im Ruhezustand

Tables 115V

Graphs 115V

This graph is generated by the PPA Standby Power Analysis software which takes full control of the power analyzer during the whole procedure. This application features all of the EN50564 & IEC62301 test limits for standby power software testing.

115V

This graph depicts the PSU`s efficiency throughout its entire operational range. For the generation of the efficiency and noise graphs we set our loaders to auto mode through our custom-made software before trying thousands of possible load combinations.

115V

Indicative Performance

The PSU`s efficiency under high ambient temperatures with 115V and 230V input. For this graph the results of the 10-110% load regulation table are used.

This graph depicts the efficiency levels of the 5VSB rail with 115V and 230V input.

115V

Test #	5VSB	DC/AC (Watts)	Efficiency	PF/AC Volts
1	0.045A	0.230	70.336%	0.020
1	5.102V	0.327	70.336%	115.15V
2	0.090A	0.460	76.795%	0.036
2	5.101V	0.599	76.795%	115.17V
3	0.550A	2.798	82.781%	0.178
3	5.087V	3.380	82.781%	115.11V
4	1.000A	5.074	83.221%	0.268
4	5.074V	6.097	83.221%	115.11V
5	1.500A	7.589	82.642%	0.329
5	5.059V	9.183	82.642%	115.11V
6	2.500A	12.572	82.170%	0.392
6	5.028V	15.300	82.170%	115.10V

Supplementary Tests (For Reference)

115V

Test #	12V	5V	3.3V	5VSB	DC/AC (Watts)	Efficiency	Fan Speed (RPM)	PSU Noise (dB[A])	Temps (In/Out)	PF/AC Volts
1	1.926A	1.988A	1.996A	0.987A	44.764	82.402%	0	<6.0	43.17°C	0.879
1	12.033V	5.029V	3.303V	5.065V	54.324	82.402%	0	<6.0	39.41°C	115.11V
2	4.847A	2.986A	3.002A	1.188A	89.240	89.735%	0	<6.0	43.92°C	0.941
2	12.038V	5.021V	3.297V	5.052V	99.448	89.735%	0	<6.0	39.83°C	115.12V
3	8.172A	3.489A	3.492A	1.389A	134.331	91.587%	0	<6.0	44.73°C	0.958
3	12.034V	5.015V	3.291V	5.040V	146.670	91.587%	0	<6.0	40.38°C	115.13V
4	11.500A	3.993A	4.015A	1.592A	179.569	92.180%	0	<6.0	45.42°C	0.960
4	12.033V	5.008V	3.285V	5.027V	194.802	92.180%	0	<6.0	40.81°C	115.14V
5	14.496A	5.000A	5.032A	1.796A	224.855	92.303%	0	<6.0	46.49°C	0.962
5	12.028V	5.000V	3.278V	5.013V	243.606	92.303%	0	<6.0	41.62°C	115.14V
6	17.429A	6.009A	6.054A	2.001A	269.386	92.200%	0	<6.0	47.51°C	0.962
6	12.025V	4.992V	3.271V	4.999V	292.175	92.200%	0	<6.0	42.27°C	115.15V
7	20.427A	7.022A	7.075A	2.207A	314.693	91.887%	0	<6.0	48.73°C	0.961
7	12.023V	4.985V	3.264V	4.985V	342.477	91.887%	0	<6.0	43.37°C	115.16V
8	23.428A	8.039A	8.105A	2.415A	360.008	91.484%	0	<6.0	49.94°C	0.962
8	12.020V	4.976V	3.257V	4.970V	393.521	91.484%	0	<6.0	44.00°C	115.16V
9	26.827A	8.553A	8.612A	2.419A	404.917	91.259%	0	<6.0	51.62°C	0.963
9	12.018V	4.970V	3.251V	4.963V	443.700	91.259%	0	<6.0	45.40°C	115.17V
10	30.162A	9.067A	9.153A	2.525A	449.629	90.935%	0	<6.0	52.75°C	0.964
10	12.016V	4.963V	3.245V	4.951V	494.451	90.935%	0	<6.0	46.24°C	115.22V
11	33.894A	9.081A	9.165A	2.529A	494.449	90.642%	0	<6.0	53.45°C	0.966
11	12.015V	4.957V	3.240V	4.944V	545.497	90.642%	0	<6.0	46.44°C	115.18V
CL1	0.136A	9.998A	9.999A	0.000A	84.456	87.652%	0	<6.0	47.53°C	0.941
CL1	12.054V	5.003V	3.280V	5.073V	96.354	87.652%	0	<6.0	42.25°C	115.12V
CL2	37.510A	1.001A	0.998A	1.000A	464.393	91.811%	0	<6.0	52.00°C	0.965
CL2	12.027V	4.982V	3.265V	5.014V	505.813	91.811%	0	<6.0	45.97°C	115.18V

The results above are not used in the certification process

115V

Test #	12V	5V	3.3V	5VSB	DC/AC (Watts)	Efficiency	Fan Speed (RPM)	PSU Noise (dB[A])	PF/AC Volts
1	1.189A	0.496A	0.481A	0.196A	19.397	74.187%	0	<6.0	0.722
1	12.034V	5.036V	3.310V	5.095V	26.146	74.187%	0	<6.0	115.10V
2	2.458A	0.993A	0.997A	0.393A	39.872	82.117%	0	<6.0	0.864
2	12.034V	5.032V	3.307V	5.086V	48.555	82.117%	0	<6.0	115.11V
3	3.651A	1.491A	1.479A	0.591A	59.321	84.822%	0	<6.0	0.910
3	12.034V	5.029V	3.303V	5.077V	69.936	84.822%	0	<6.0	115.11V
4	4.912A	1.990A	1.998A	0.789A	79.730	89.502%	0	<6.0	0.932
4	12.040V	5.025V	3.300V	5.067V	89.082	89.502%	0	<6.0	115.12V

The results above are not used in the certification process

115V

Test	12V	5V	3.3V	5VSB	Pass/Fail
10% Load	7.2 mV	7.7 mV	13.1 mV	12.5 mV	Pass
20% Load	12.8 mV	7.7 mV	14.1 mV	13.6 mV	Pass
30% Load	8.9 mV	8.8 mV	14.7 mV	13.9 mV	Pass
40% Load	10.3 mV	10.1 mV	14.4 mV	14.9 mV	Pass
50% Load	11.7 mV	11.8 mV	15.8 mV	16.0 mV	Pass
60% Load	12.7 mV	12.8 mV	17.9 mV	15.8 mV	Pass
70% Load	13.8 mV	13.4 mV	17.6 mV	17.2 mV	Pass
80% Load	15.0 mV	17.0 mV	20.1 mV	17.5 mV	Pass
90% Load	16.4 mV	17.7 mV	18.5 mV	18.3 mV	Pass
100% Load	20.3 mV	18.6 mV	23.5 mV	19.5 mV	Pass
110% Load	21.8 mV	19.7 mV	23.8 mV	20.9 mV	Pass
Crossload 1	15.2 mV	9.0 mV	16.5 mV	9.2 mV	Pass
Crossload 2	20.4 mV	18.5 mV	20.1 mV	21.8 mV	Pass

The results above are not used in the certification process

SilverStone Nightjar 450W (#2)

Top side

Power specifications label