Cybenetics Test - Enermax Platimax D.F. 1200W

Enermax Platimax D.F. 1200W

Lab ID215

Report:
Receipt Date: Nov 3, 2018
Test Date: Nov 11, 2018
Report Date: Nov 13, 2018

	115V	230V
Wirkungsgrad

115V	230V
		Lautstärkeklasse

Aristeidis Bitziopoulos, Laboratory General Manager

General Information

	Enermax
Hersteller (OEM)	Channel Well Technology
	Platimax D.F.
	EPF1200EWT

(Vrms)	100-240
(Arms)	14-7
(Hz)	47-63
(W)	1200
	ATX12V
	140mm Twister Bearing Fan (ED142512H-FA)
	✓
	Fully Modular

Rail		3.3V	5V	12V1	12V2	12V3	12V4	5VSB	-12V
Max. Power	Amps	25	25	25	25	40	40	3	0.3
Max. Power	Watts	130		1200				15	3.6
Total Max. Power (W)		1200

Electronic Loads	Chroma 6314A x2 63123A x6 63102A 63101A	Chroma 63601-5 x2 Chroma 63600-2 63640-80-80 x10 63610-80-20
AC Sources	Chroma 6530, Chroma 61604
Power Analyzers	N4L PPA1530, N4L PPA5530
Oscilloscopes	Picoscope 4444 & 3424, Keysight DSOX3024A, Rigol DS2072A
Voltmeter	Keithley 2015 THD 6.5 Digit
Sound Analyzer	Bruel & Kjaer 2250-L G4
Microphone	Bruel & Kjaer Type 4955-A, Bruel & Kjaer Type 4189
Data Loggers	Picoscope TC-08 x2, Labjack U3-HV x2
Testing Methodology	Cybenetics PSU Test Protocol

Modular Cables
Description	Cable Count	Connector Count (Total)	Gauge	In Cable Capacitors
ATX connector 20+4 pin (600mm)	1	1	16-20AWG	No
4+4 pin EPS12V (700mm)	1	1	16AWG	No
8 pin EPS12V (700mm)	1	1	16AWG	No
6+2 pin PCIe (2x600mm)	3	6	16-20AWG	No
SATA (500mm+150mm+150mm+150mm)	3	12	18AWG	No
4 pin Molex (500mm+140mm+140mm+140mm)	1	4	18AWG	No
AC Power Cord (1400mm) - C13 coupler	1	1	18AWG	No

Parts Description

General Data
Manufacturer (OEM)	CWT
Primary Side
Transient Filter	6x Y caps, 2x X caps, 2x CM chokes, 1x MOV
Inrush Protection	NTC Thermistor & Relay
Bridge Rectifier(s)	2x Vishay LVB2560 (600V, 25A @ 105°C)
APFC MOSFETS	2x Toshiba TK25A60X (600V, 25A @ 150°C, 0.105Ohm)
APFC Boost Diode	2x CREE C3D06060A (600V, 6A @ 154°C)
Hold-up Cap(s)	2x Nippon Chemi-Con (400V, 470uF, 2000h @ 105°C, KMR)
Main Switchers	4x B21N60EF
Driver ICs	2x Texas Instruments UCC21520
APFC Controller	Texas Instruments UCD3138A (31.25 MHz, 32-bit ARM7TDMI-S Processor, 32KB Flash, 4KB RAM, 3x Feedback loop control, 14-bit DAC, up to 2 MHz switching frequency)
LLC Resonant Controller	Champion CM6901T6X
Topology	Primary side: Interleaved PFC, Full-Bridge & LLC Resonant Controller Secondary side: Synchronous Rectification & DC-DC converters
Secondary Side
+12V MOSFETS	8x Infineon BSC014N06NS (60V, 100A @ 100°C, 1.45mOhm)
5V & 3.3V	DC-DC Converters: 2x UBIQ QM3016D (30V, 68A @ 100°C, 4mOhm) 2x UBIQ QM3006D (30V, 57A @ 100°C, 5.5mOhm) PWM Controller: 1x Anpec APW7159C
Filtering Capacitors	Electrolytics: Nippon Chemi-Con (1-5,000 @ 105°C, KZE), Nippon Chemi-Con (4-10,000 @ 105°C, KY) Polymers: Su' scon, APAQ, Elite
Supervisor IC	Weltrend WT7518 (OCP, PG, SCP) & Weltrend WT751002 (OVP, UVP, PG) & LM358
Fan Model	Enermax ED142512H-FA (140mm, 12V, 0.46A, Twister Bearing)
5VSB Circuit
Rectifiers	ISD04N65A (650V, 4A, 2.5Ohm), SPN5003 (N-Channel Enhancement Mode FET), & PS1045L SBR
Driver IC	Texas Instruments UCC27324
PWM Controller	On-Bright OB5282CP

Test Results

Temperature & Compliance Info

(°C /°F)	30-32 / 86-89.6
	✓
	✓

Performance Summary 115V

Wirkungsgrad	PLATINUM
Lautstärkeklasse	Standard++
(>1450 load combinations)	89.530%
Average Noise Output (>1450 Load Combinations)	32.33dBA
(>1450 Load Combinations)	0.993
Efficiency With 10W (≤500W) or 2% (>500W) Load	0.000%
	0.0376W
12V Ripple (Full Load)	39.84mV
5V Ripple (Full Load)	24.97mV
3.3V Ripple (Full Load)	39.01mV
5VSB Ripple (Full Load)	33.01mV
12V Load Regulation	1.60%
5V Load Regulation	0.47%
3.3V Load Regulation	0.90%
5VSB Load Regulation	1.44%
Inrush Current	19.871A

Hold-Up Time (ms)	17.8
AC Loss to PWR_OK Hold Up Time (ms)	15.7
PWR_OK Inactive to DC Loss Delay (ms)	2.1

Stromverbrauch im Ruhezustand

Tables 115V

Graphs 115V

This graph is generated by the PPA Standby Power Analysis software which takes full control of the power analyzer during the whole procedure. This application features all of the EN50564 & IEC62301 test limits for standby power software testing.

115V

This graph depicts the PSU`s efficiency throughout its entire operational range. For the generation of the efficiency and noise graphs we set our loaders to auto mode through our custom-made software before trying thousands of possible load combinations.

115V

The PSU`s noise in its entire operational range and under 30-32 °C ambient is depicted in this graph. The X axis represents the load on the +12V rail(s) while the Y axis is the load on the minor rails.

Indicative Performance

The PSU`s efficiency under high ambient temperatures with 115V and 230V input. For this graph the results of the 10-110% load regulation table are used.

This graph depicts the efficiency levels of the 5VSB rail with 115V and 230V input.

115V

Test #	5VSB	DC/AC (Watts)	Efficiency	PF/AC Volts
1	0.045A	0.225	67.164%	0.025
1	4.992V	0.335	67.164%	115.28V
2	0.090A	0.449	73.246%	0.045
2	4.990V	0.613	73.246%	115.27V
3	0.550A	2.737	79.287%	0.210
3	4.976V	3.452	79.287%	115.27V
4	1.000A	4.962	79.240%	0.303
4	4.962V	6.262	79.240%	115.27V
5	1.500A	7.420	79.029%	0.361
5	4.947V	9.389	79.029%	115.26V
6	3.000A	14.701	78.122%	0.436
6	4.901V	18.818	78.122%	115.26V

Supplementary Tests (For Reference)

115V

Test #	12V	5V	3.3V	5VSB	DC/AC (Watts)	Efficiency	Fan Speed (RPM)	PSU Noise (dB[A])	Temps (In/Out)	PF/AC Volts
1	8.176A	1.968A	1.989A	0.989A	119.994	89.032%	0	<6.0	48.33°C	0.982
1	12.035V	5.078V	3.318V	5.058V	134.776	89.032%	0	<6.0	38.18°C	115.22V
2	17.371A	2.955A	2.984A	1.188A	239.713	91.969%	0	<6.0	49.17°C	0.992
2	12.021V	5.076V	3.315V	5.054V	260.645	91.969%	0	<6.0	38.54°C	115.05V
3	26.922A	3.450A	3.472A	1.387A	359.197	92.021%	1105	31.8	38.76°C	0.994
3	12.005V	5.073V	3.311V	5.047V	390.344	92.021%	1105	31.8	49.81°C	114.98V
4	36.561A	3.945A	3.993A	1.587A	479.649	92.059%	1105	31.8	39.06°C	0.996
4	11.992V	5.070V	3.308V	5.041V	521.022	92.059%	1105	31.8	50.49°C	114.85V
5	45.843A	4.934A	4.994A	1.788A	599.801	91.726%	1105	31.8	39.67°C	0.997
5	11.982V	5.068V	3.304V	5.036V	653.908	91.726%	1105	31.8	51.40°C	114.74V
6	55.061A	5.923A	5.996A	1.988A	719.933	91.010%	1105	31.8	40.62°C	0.997
6	11.989V	5.066V	3.302V	5.031V	791.044	91.010%	1105	31.8	54.33°C	114.66V
7	64.268A	6.914A	7.004A	2.189A	839.688	90.154%	1230	36.5	41.89°C	0.998
7	11.990V	5.063V	3.299V	5.026V	931.393	90.154%	1230	36.5	57.89°C	114.48V
8	73.609A	7.906A	8.011A	2.391A	960.183	89.385%	1330	36.0	43.18°C	0.998
8	11.979V	5.061V	3.296V	5.021V	1074.210	89.385%	1330	36.0	61.54°C	114.37V
9	83.291A	8.404A	8.504A	2.391A	1079.515	88.503%	1410	37.6	45.35°C	0.998
9	11.970V	5.059V	3.293V	5.020V	1219.744	88.503%	1410	37.6	66.55°C	114.16V
10	92.846A	8.903A	9.028A	2.999A	1199.973	87.437%	1410	37.6	46.03°C	0.998
10	11.958V	5.056V	3.290V	5.003V	1372.384	87.437%	1410	37.6	71.73°C	114.05V
11	102.952A	8.905A	9.037A	3.000A	1319.896	86.295%	1625	42.1	47.79°C	0.998
11	11.949V	5.055V	3.287V	5.001V	1529.516	86.295%	1625	42.1	74.87°C	113.85V
CL1	0.744A	16.005A	15.999A	0.000A	143.069	83.059%	0	0	48.25°C	0.987
CL1	12.031V	5.069V	3.312V	5.112V	172.249	83.059%	0	0	46.09°C	115.15V
CL2	100.011A	1.001A	0.999A	1.000A	1210.027	87.632%	1430	37.1	47.23°C	0.998
CL2	11.965V	5.062V	3.293V	5.038V	1380.807	87.632%	1430	37.1	72.93°C	114.07V

The results above are not used in the certification process

115V

Test #	12V	5V	3.3V	5VSB	DC/AC (Watts)	Efficiency	Fan Speed (RPM)	PSU Noise (dB[A])	PF/AC Volts
1	1.173A	0.491A	0.482A	0.197A	19.355	64.784%	0	<6.0	0.694
1	12.157V	5.081V	3.321V	5.076V	29.876	64.784%	0	<6.0	115.34V
2	2.431A	0.983A	0.993A	0.395A	39.835	76.890%	0	<6.0	0.873
2	12.152V	5.080V	3.320V	5.072V	51.808	76.890%	0	<6.0	115.31V
3	3.649A	1.475A	1.475A	0.592A	59.310	82.427%	0	<6.0	0.946
3	12.037V	5.079V	3.319V	5.067V	71.955	82.427%	0	<6.0	115.28V
4	4.919A	1.968A	1.989A	0.790A	79.797	85.774%	0	<6.0	0.968
4	12.035V	5.079V	3.319V	5.064V	93.032	85.774%	0	<6.0	115.26V

The results above are not used in the certification process

115V

Test	12V	5V	3.3V	5VSB	Pass/Fail
10% Load	12.9 mV	4.9 mV	5.3 mV	4.0 mV	Pass
20% Load	19.7 mV	6.0 mV	6.9 mV	5.6 mV	Pass
30% Load	28.2 mV	6.7 mV	16.5 mV	8.6 mV	Pass
40% Load	32.9 mV	7.7 mV	18.3 mV	10.5 mV	Pass
50% Load	39.3 mV	8.4 mV	19.4 mV	12.9 mV	Pass
60% Load	29.5 mV	17.1 mV	25.7 mV	20.2 mV	Pass
70% Load	29.4 mV	9.4 mV	24.2 mV	14.7 mV	Pass
80% Load	32.8 mV	10.4 mV	24.9 mV	16.4 mV	Pass
90% Load	35.7 mV	14.0 mV	30.0 mV	21.2 mV	Pass
100% Load	39.8 mV	25.0 mV	39.0 mV	33.0 mV	Pass
110% Load	45.0 mV	27.5 mV	40.4 mV	48.5 mV	Pass
Crossload 1	15.7 mV	10.1 mV	18.8 mV	5.1 mV	Pass
Crossload 2	39.2 mV	27.4 mV	37.0 mV	34.6 mV	Pass

The results above are not used in the certification process

Enermax Platimax D.F. 1200W

Top side

Power specifications label