Cybenetics Test - Kolink Continuum 1050W

Kolink Continuum 1050W

173591A00PTT1F04001795

Lab ID182

Report:
Receipt Date: Sep 16, 2018
Test Date: Sep 25, 2018
Report Date: Sep 27, 2018

	115V	230V
效率評比

115V	230V
		噪音評比

Aristeidis Bitziopoulos, Laboratory General Manager

General Information

	Kolink
製造商 (OEM)	Sirfa / High Power
	Continuum
	KL-C1050PL
	173591A00PTT1F04001795

(Vrms)	100-240
(Arms)	15
(Hz)	50-60
(W)	1050
	ATX12V
	135mm Double Ball-Bearing Fan (RL4Z B1352512M)
	✗
	Fully Modular

Rail		3.3V	5V	12V	5VSB	-12V
Max. Power	Amps	25	25	87.5	3	0.3
Max. Power	Watts	130		1050	15	3.6
Total Max. Power (W)		1050

Electronic Loads	Chroma 6314A x2 63123A x6 63102A 63101A	Chroma 63601-5 x2 Chroma 63600-2 63640-80-80 x10 63610-80-20
AC Sources	Chroma 6530, Chroma 61604
Power Analyzers	N4L PPA1530, N4L PPA5530
Oscilloscopes	Picoscope 4444 & 3424, Keysight DSOX3024A, Rigol DS2072A
Voltmeter	Keithley 2015 THD 6.5 Digit
Sound Analyzer	Bruel & Kjaer 2250-L G4
Microphone	Bruel & Kjaer Type 4955-A, Bruel & Kjaer Type 4189
Data Loggers	Picoscope TC-08 x2, Labjack U3-HV x2
Testing Methodology	Cybenetics PSU Test Protocol

Modular Cables
Description	Cable Count	Connector Count (Total)	Gauge
ATX connector 20+4 pin (600mm)	1	1	18AWG
4+4 pin EPS12V (700mm)	1	1	16AWG
8 pin EPS12V (600mm)	1	1	16AWG
6+2 pin PCIe (600mm+200mm)	3	6	16-18AWG
SATA (400mm+150mm+150mm+150mm)	2	8	18AWG
4 pin Molex (450mm+100mm+100mm+100mm)	2	8	18AWG

Parts Description

General Data
Manufacturer (OEM)	CWT
Platform Model	-
Primary Side
Transient Filter	4x Y caps, 2x X caps, 2x CM chokes, 1x MOV
Inrush Protection	NTC Thermistor & Diode
Bridge Rectifier(s)	2x GBU1006 (600V, 10A @ 100°C)
APFC MOSFETS	2x Infineon IPW50R280CE (550V, 11.4A @ 100°C, 0.28Ohm)
APFC Boost Diode	1x Power Integrations QH08TZ600 (600V, 8A @ 150°C)
Hold-up Cap(s)	1x Nichicon (400V, 390uF, 2000h @ 105 °C, GG)
Main Switchers	2x Vishay SiHG20N50C (560V, 11A @ 100°C, 0.27Ohm)
Combo APFC/PWM Controller	Champion CM6800TX & CM03X Green PFC controller
Topology	Primary side: Half-Bridge & LLC Resonant Controller Secondary side: Synchronous Rectification & DC-DC converters
Secondary Side
+12V MOSFETS	4x APEC AP9990GH-HF (60V, 100A @ 25°C, 6mOhm)
5V & 3.3V	DC-DC Converters: 6x APEC AP72T03GP (30V, 47A @ 100°C, 9.5mOhm) PWM Controller: APW7159C
Filtering Capacitors	Electrolytics: Nippon Chemi-Con (1-5,000 @ 105°C, KZE), Su' scon (2-5,000h @ 105°C, MF), TAICON (105°C) Polymers: APAQ, EneSol
Supervisor IC	Weltrend WT7502 (OVP, UVP, SCP, PG)
Fan Model	Power Logic PLA13525S12M (12V, 0.40A, 111.1CFM, 41.6 dBA, Hydro Dynamic Bearing)
5VSB Circuit
Rectifier	1x MBR2045CT SBR (45V, 20A) & CEF04N7G (700V, 4A, 3.3Ohm)
Standby PWM Controller	On-Bright OB5269CP
-12V Circuit
Rectifier	UTC 2SB834L

Test Results

Temperature & Compliance Info

(°C /°F)	30-32 / 86-89.6
	✓
	✓

Performance Summary 115V

效率評比	PLATINUM
噪音評比	Standard++
(>1450 load combinations)	90.029%
Average Noise Output (>1450 Load Combinations)	31.64dBA
(>1450 Load Combinations)	0.982
Efficiency With 10W (≤500W) or 2% (>500W) Load	0.000%
	0.1034W
12V Ripple (Full Load)	73.19mV
5V Ripple (Full Load)	42.66mV
3.3V Ripple (Full Load)	48.71mV
5VSB Ripple (Full Load)	51.77mV
12V Load Regulation	1.30%
5V Load Regulation	1.15%
3.3V Load Regulation	1.67%
5VSB Load Regulation	3.26%
Inrush Current	117.914A

Hold-Up Time (ms)	17.1
AC Loss to PWR_OK Hold Up Time (ms)	13.9
PWR_OK Inactive to DC Loss Delay (ms)	3.2

待機電源消耗

Graphs 115V

This graph is generated by the PPA Standby Power Analysis software which takes full control of the power analyzer during the whole procedure. This application features all of the EN50564 & IEC62301 test limits for standby power software testing.

115V

This graph depicts the PSU`s efficiency throughout its entire operational range. For the generation of the efficiency and noise graphs we set our loaders to auto mode through our custom-made software before trying thousands of possible load combinations.

115V

The PSU`s noise in its entire operational range and under 30-32 °C ambient is depicted in this graph. The X axis represents the load on the +12V rail(s) while the Y axis is the load on the minor rails.

Indicative Performance

The PSU`s efficiency under high ambient temperatures with 115V and 230V input. For this graph the results of the 10-110% load regulation table are used.

This graph depicts the efficiency levels of the 5VSB rail with 115V and 230V input.

115V

Test #	5VSB	DC/AC (Watts)	Efficiency	PF/AC Volts
1	0.041A	0.210	56.150%	0.055
1	5.064V	0.374	56.150%	115.18V
2	0.087A	0.440	66.566%	0.093
2	5.062V	0.661	66.566%	207.59V
3	0.542A	2.734	77.123%	0.263
3	5.044V	3.545	77.123%	115.16V
4	1.002A	5.036	77.549%	0.307
4	5.027V	6.494	77.549%	115.16V
5	1.501A	7.520	77.742%	0.329
5	5.009V	9.673	77.742%	115.17V
6	3.001A	14.850	77.871%	0.365
6	4.948V	19.070	77.871%	115.17V

Supplementary Tests (For Reference)

115V

Test #	12V	5V	3.3V	5VSB	DC/AC (Watts)	Efficiency	Fan Speed (RPM)	PSU Noise (dB[A])	Temps (In/Out)	PF/AC Volts
1	6.706A	1.952A	1.965A	0.980A	104.808	88.681%	1088	30.4	38.16°C	0.956
1	12.411V	5.123V	3.358V	5.083V	118.186	88.681%	1088	30.4	41.51°C	115.18V
2	14.425A	2.927A	2.950A	1.180A	209.647	91.530%	1128	32.2	38.33°C	0.975
2	12.395V	5.117V	3.352V	5.070V	229.048	91.530%	1128	32.2	42.98°C	115.18V
3	22.519A	3.425A	3.464A	1.380A	314.830	92.147%	1160	33.6	38.84°C	0.981
3	12.379V	5.110V	3.345V	5.057V	341.659	92.147%	1160	33.6	44.81°C	115.18V
4	30.611A	3.913A	3.950A	1.585A	419.632	92.139%	1215	34.2	39.39°C	0.983
4	12.364V	5.104V	3.340V	5.043V	455.433	92.139%	1215	34.2	46.80°C	115.18V
5	38.392A	4.908A	4.945A	1.786A	524.563	91.734%	1230	34.9	39.99°C	0.983
5	12.348V	5.098V	3.335V	5.031V	571.832	91.734%	1230	34.9	49.14°C	115.17V
6	46.196A	5.892A	5.944A	1.990A	629.459	91.253%	1240	35.2	40.74°C	0.986
6	12.332V	5.092V	3.328V	5.018V	689.795	91.253%	1240	35.2	52.04°C	115.17V
7	54.022A	6.885A	6.951A	2.195A	734.373	90.704%	1240	35.2	41.97°C	0.988
7	12.315V	5.086V	3.322V	5.004V	809.641	90.704%	1240	35.2	55.49°C	115.17V
8	61.863A	7.884A	7.960A	2.401A	839.280	90.169%	1240	35.2	43.23°C	0.990
8	12.299V	5.080V	3.316V	4.990V	930.789	90.169%	1240	35.2	59.23°C	115.16V
9	70.148A	8.382A	8.485A	2.406A	944.184	89.497%	1240	35.2	44.68°C	0.991
9	12.282V	5.074V	3.312V	4.985V	1054.988	89.497%	1240	35.2	64.02°C	115.18V
10	78.208A	8.882A	8.983A	3.025A	1048.916	88.718%	1240	35.2	45.89°C	0.992
10	12.265V	5.069V	3.305V	4.953V	1182.309	88.718%	1240	35.2	67.76°C	115.18V
11	86.880A	8.890A	9.000A	3.030A	1153.814	87.968%	1240	35.2	46.67°C	0.993
11	12.248V	5.064V	3.300V	4.947V	1311.628	87.968%	1240	35.2	68.98°C	115.16V
CL1	0.098A	16.031A	16.003A	0.004A	136.637	83.719%	1240	35.2	45.63°C	0.965
CL1	12.411V	5.109V	3.343V	5.140V	163.210	83.719%	1240	35.2	62.38°C	115.19V
CL2	87.418A	1.004A	1.001A	1.002A	1084.952	88.774%	1240	35.2	46.14°C	0.992
CL2	12.257V	5.081V	3.315V	5.040V	1222.157	88.774%	1240	35.2	66.45°C	115.17V

The results above are not used in the certification process

115V

Test #	12V	5V	3.3V	5VSB	DC/AC (Watts)	Efficiency	Fan Speed (RPM)	PSU Noise (dB[A])	PF/AC Volts
1	1.174A	0.482A	0.474A	0.196A	19.664	57.183%	977	27.9	0.917
1	12.431V	5.129V	3.363V	5.120V	34.388	57.183%	977	27.9	115.19V
2	2.375A	0.970A	0.981A	0.391A	39.781	75.918%	1015	28.6	0.904
2	12.426V	5.128V	3.361V	5.111V	52.400	75.918%	1015	28.6	115.19V
3	3.574A	1.461A	1.485A	0.586A	59.862	82.871%	1065	29.4	0.949
3	12.421V	5.127V	3.360V	5.100V	72.235	82.871%	1065	29.4	115.19V
4	4.769A	1.955A	1.963A	0.785A	79.821	87.383%	1070	29.5	0.946
4	12.416V	5.124V	3.359V	5.093V	91.346	87.383%	1070	29.5	115.18V

The results above are not used in the certification process

115V

Test	12V	5V	3.3V	5VSB	Pass/Fail
10% Load	45.3 mV	35.2 mV	33.0 mV	38.6 mV	Pass
20% Load	48.7 mV	34.6 mV	36.7 mV	44.9 mV	Pass
30% Load	46.8 mV	32.0 mV	32.0 mV	43.1 mV	Pass
40% Load	48.2 mV	36.9 mV	41.6 mV	50.6 mV	Fail
50% Load	53.0 mV	30.0 mV	29.5 mV	30.2 mV	Pass
60% Load	54.4 mV	32.2 mV	34.9 mV	37.1 mV	Pass
70% Load	60.8 mV	35.3 mV	36.4 mV	37.1 mV	Pass
80% Load	64.0 mV	40.9 mV	41.0 mV	36.9 mV	Pass
90% Load	68.8 mV	39.7 mV	45.9 mV	42.7 mV	Pass
100% Load	73.2 mV	42.7 mV	48.7 mV	51.8 mV	Fail
110% Load	80.1 mV	44.9 mV	55.9 mV	53.0 mV	Fail
Crossload 1	51.1 mV	37.5 mV	33.6 mV	38.9 mV	Pass
Crossload 2	71.3 mV	40.9 mV	47.1 mV	49.8 mV	Pass

The results above are not used in the certification process

Kolink Continuum 1050W

Top side

Power specifications label

General Information

Parts Description

Test Results

Temperature & Compliance Info

Performance Summary 115V

待機電源消耗

Tables 115V

Graphs 115V

115V

115V

Indicative Performance

115V

Supplementary Tests (For Reference)

115V

115V

115V

Kolink Continuum 1050W