Cybenetics Test - SilverStone SFX 550W

SilverStone SFX 550W

S6101000173

Lab ID130

Report:
Receipt Date: Jun 16, 2018
Test Date: Jun 20, 2018
Report Date: Jun 22, 2018

	115V	230V
效率評比

115V	230V
		噪音評比

Aristeidis Bitziopoulos, Laboratory General Manager

General Information

	SilverStone
製造商 (OEM)	FSP
	SFX
	SX550
	S6101000173
	Retested on 10/16/2017

(Vrms)	100-240
(Arms)	8-4
(Hz)	50-60
(W)	550
	SFX
	80mm Sleeve Bearing Fan (MGA8012YS-A15)
	✗
	Fixed cables

Rail		3.3V	5V	12V	5VSB	-12V
Max. Power	Amps	21	22	45	2.5	0.3
Max. Power	Watts	120		540	12.5	3.6
Total Max. Power (W)		550

Electronic Loads	Chroma 6314A x2 63123A x6 63102A 63101A	Chroma 63601-5 x2 Chroma 63600-2 63640-80-80 x10 63610-80-20
AC Sources	Chroma 6530, Chroma 61604
Power Analyzers	N4L PPA1530, N4L PPA5530
Oscilloscopes	Picoscope 4444 & 3424, Keysight DSOX3024A, Rigol DS2072A
Voltmeter	Keithley 2015 THD 6.5 Digit
Sound Analyzer	Bruel & Kjaer 2250-L G4
Microphone	Bruel & Kjaer Type 4189
Data Loggers	Picoscope TC-08 x2, Labjack U3-HV x2
Testing Methodology	Cybenetics PSU Test Protocol

Captive Cables
Description	Cable Count	Connector Count (Total)	Gauge
ATX connector 20+4 pin (310mm)	1	1	20AWG
4+4 pin EPS12V (420mm)	1	1	18AWG
6+2 pin PCIe (420mm+155mm)	1	2	18AWG
SATA (315mm+200mm+100mm)	1	3	20AWG
4 pin Molex (315mm+200mm) / FDD (+200mm)	1	2 / 1	20-22AWG

Parts Description

Primary Side
Transient Filter	4x Y caps, 3x X caps, 2x CM chokes, 1x MOV
Inrush Protection	NTC Thermistor & Relay
Bridge Rectifier(s)	2x GBU10V06 (600V, 2.9A @ 100°C - without heatsink)
APFC MOSFETS	2x Infineon IPA60R125CP (650V, 16A @ 100°C, 0.125 Ohm)
APFC Boost Diode	1x STMicroelectronics STTH8R06FP (600V, 8A @ 85°C)
Hold-up Cap(s)	2x Nippon Chemi-Con (420V, 150uF each, 2000h @ 105°C, KMG)
Main Switcher	1x Infineon SPA17N80C3 (800V, 11A @ 100°C, 0.29 ohm)
Reset Switch	Fairchild FQPF3N80C (800V, 1.9A @ 100°C, 4.8 ohm)
APFC/Switching Controller	FSP 6600 IC
Topology	Primary side: Active Clamp Reset Forward Secondary side: Synchronous Rectification & DC-DC converters
Secondary Side
+12V MOSFETS	2x Texas Instruments CSD19506KCS (80V, 193A @ 100°C, 2.2 mOhm)
5V & 3.3V	DC-DC Converters: 4x Infineon BSC030N03LS G (30V, 77A @ 100°C, 3 mOhm) PWM Controller: ANPEC APW7159C
Filtering Capacitors	Electrolytics: Nippon Chemi-Con (105°C, KZE, KZH) Polymers: Teapo
Supervisor IC	FSP6601
Fan Model	Protechnic Electric MGA8012YS-A15 (80mm, 12V, 0.28A, Sleeve Bearing)
5VSB Circuit
Rectifier	1x A-Power AP03N70I-H FET (700V, 2.5A, 4.4 Ohm)

Test Results

Temperature & Compliance Info

(°C /°F)	30-32 / 86-89.6
	✓
	✓

Performance Summary 115V

效率評比	GOLD
噪音評比	A-
(>1450 load combinations)	87.847%
Average Noise Output (>1450 Load Combinations)	29.14dBA
(>1450 Load Combinations)	0.992
Efficiency With 10W (≤500W) or 2% (>500W) Load	0.000%
	0.1207W
12V Ripple (Full Load)	61.55mV
5V Ripple (Full Load)	39.36mV
3.3V Ripple (Full Load)	26.07mV
5VSB Ripple (Full Load)	14.06mV
12V Load Regulation	1.62%
5V Load Regulation	2.34%
3.3V Load Regulation	2.49%
5VSB Load Regulation	3.64%
Inrush Current	39.893A

Hold-Up Time (ms)	21.7
AC Loss to PWR_OK Hold Up Time (ms)	17.5
PWR_OK Inactive to DC Loss Delay (ms)	4.2

待機電源消耗

Tables 115V

Graphs 115V

This graph is generated by the PPA Standby Power Analysis software which takes full control of the power analyzer during the whole procedure. This application features all of the EN50564 & IEC62301 test limits for standby power software testing.

115V

This graph depicts the PSU`s efficiency throughout its entire operational range. For the generation of the efficiency and noise graphs we set our loaders to auto mode through our custom-made software before trying thousands of possible load combinations.

115V

The PSU`s noise in its entire operational range and under 30-32 °C ambient is depicted in this graph. The X axis represents the load on the +12V rail(s) while the Y axis is the load on the minor rails.

Indicative Performance

The PSU`s efficiency under high ambient temperatures with 115V and 230V input. For this graph the results of the 10-110% load regulation table are used.

This graph depicts the efficiency levels of the 5VSB rail with 115V and 230V input.

115V

Test #	5VSB	DC/AC (Watts)	Efficiency	PF/AC Volts
1	0.045A	0.228	59.843%	0.035
1	5.063V	0.381	59.843%	115.39V
2	0.090A	0.456	69.939%	0.059
2	5.063V	0.652	69.939%	115.39V
3	0.550A	2.775	78.191%	0.256
3	5.044V	3.549	78.191%	115.38V
4	1.000A	5.024	79.975%	0.351
4	5.024V	6.282	79.975%	115.38V
5	1.500A	7.501	79.283%	0.409
5	5.000V	9.461	79.283%	115.37V
6	2.499A	12.380	76.971%	0.463
6	4.953V	16.084	76.971%	115.36V

Supplementary Tests (For Reference)

115V

Test #	12V	5V	3.3V	5VSB	DC/AC (Watts)	Efficiency	Fan Speed (RPM)	PSU Noise (dB[A])	Temps (In/Out)	PF/AC Volts
1	2.737A	1.966A	1.958A	0.998A	54.473	82.258%	1412	15.8	38.29°C	0.962
1	12.011V	5.087V	3.369V	5.011V	66.222	82.258%	1412	15.8	46.83°C	115.31V
2	6.547A	2.957A	2.947A	1.202A	109.366	87.493%	1412	15.8	38.60°C	0.980
2	11.984V	5.074V	3.359V	4.995V	125.000	87.493%	1412	15.8	48.55°C	115.23V
3	10.761A	3.456A	3.430A	1.406A	164.872	89.239%	1412	15.8	39.15°C	0.989
3	11.976V	5.064V	3.352V	4.979V	184.753	89.239%	1412	15.8	49.84°C	115.14V
4	14.908A	3.960A	3.946A	1.612A	219.690	89.562%	1594	20.0	39.39°C	0.995
4	11.972V	5.053V	3.345V	4.964V	245.293	89.562%	1594	20.0	51.52°C	115.16V
5	18.738A	4.962A	4.946A	1.820A	274.582	89.470%	1919	25.2	40.07°C	0.997
5	11.958V	5.040V	3.336V	4.948V	306.899	89.470%	1919	25.2	53.20°C	115.07V
6	22.577A	5.970A	5.952A	2.029A	329.510	89.145%	2265	30.2	40.84°C	0.998
6	11.946V	5.026V	3.326V	4.931V	369.632	89.145%	2265	30.2	55.27°C	114.99V
7	26.472A	6.983A	6.964A	2.240A	384.809	88.587%	2602	34.2	42.13°C	0.998
7	11.926V	5.012V	3.317V	4.913V	434.385	88.587%	2602	34.2	58.24°C	115.01V
8	30.402A	8.005A	7.983A	2.453A	440.109	87.845%	2957	38.4	42.55°C	0.999
8	11.897V	4.998V	3.307V	4.895V	501.004	87.845%	2957	38.4	61.20°C	114.92V
9	34.754A	8.522A	8.489A	2.457A	494.630	87.030%	3250	40.7	44.29°C	0.999
9	11.858V	4.988V	3.299V	4.886V	568.343	87.030%	3250	40.7	63.97°C	114.83V
10	39.131A	9.043A	9.027A	2.567A	549.744	85.951%	3460	42.2	45.73°C	0.999
10	11.820V	4.977V	3.291V	4.870V	639.602	85.951%	3460	42.2	66.99°C	114.84V
11	44.160A	9.055A	9.046A	2.572A	604.956	84.953%	3460	42.2	46.73°C	0.999
11	11.724V	4.971V	3.284V	4.862V	712.108	84.953%	3460	42.2	69.73°C	114.75V
CL1	0.737A	14.003A	13.999A	0.000A	125.036	82.678%	2745	35.6	44.38°C	0.985
CL1	11.993V	4.981V	3.318V	5.026V	151.233	82.678%	2745	35.6	58.28°C	115.19V
CL2	45.005A	1.002A	1.000A	1.000A	545.702	86.687%	3450	42.0	45.35°C	0.999
CL2	11.829V	5.046V	3.322V	4.960V	629.508	86.687%	3450	42.0	63.22°C	114.77V

The results above are not used in the certification process

115V

Test #	12V	5V	3.3V	5VSB	DC/AC (Watts)	Efficiency	Fan Speed (RPM)	PSU Noise (dB[A])	PF/AC Volts
1	1.204A	0.490A	0.473A	0.198A	19.564	68.547%	1412	15.8	0.826
1	12.015V	5.101V	3.379V	5.054V	28.541	68.547%	1412	15.8	115.36V
2	2.465A	0.984A	0.978A	0.397A	39.934	79.834%	1412	15.8	0.939
2	12.015V	5.096V	3.375V	5.043V	50.021	79.834%	1412	15.8	115.33V
3	3.669A	1.473A	1.451A	0.597A	59.458	83.994%	1412	15.8	0.965
3	12.010V	5.090V	3.371V	5.031V	70.788	83.994%	1412	15.8	115.30V
4	4.937A	1.967A	1.961A	0.797A	79.862	86.137%	1412	15.8	0.972
4	12.003V	5.085V	3.366V	5.019V	92.715	86.137%	1412	15.8	115.27V

The results above are not used in the certification process

115V

Test	12V	5V	3.3V	5VSB	Pass/Fail
10% Load	10.9 mV	15.9 mV	13.7 mV	11.5 mV	Pass
20% Load	28.6 mV	23.1 mV	15.5 mV	14.5 mV	Pass
30% Load	28.0 mV	22.7 mV	14.9 mV	7.8 mV	Pass
40% Load	29.2 mV	22.9 mV	15.6 mV	8.7 mV	Pass
50% Load	33.2 mV	25.5 mV	16.5 mV	9.3 mV	Pass
60% Load	33.9 mV	28.8 mV	18.9 mV	10.2 mV	Pass
70% Load	36.6 mV	32.1 mV	20.7 mV	10.6 mV	Pass
80% Load	38.0 mV	33.2 mV	20.9 mV	11.0 mV	Pass
90% Load	46.3 mV	36.5 mV	22.9 mV	12.3 mV	Pass
100% Load	61.6 mV	39.4 mV	26.1 mV	14.1 mV	Pass
110% Load	97.3 mV	41.8 mV	27.3 mV	15.2 mV	Pass
Crossload 1	33.4 mV	26.5 mV	18.7 mV	17.0 mV	Pass
Crossload 2	60.2 mV	38.3 mV	25.4 mV	18.2 mV	Pass

The results above are not used in the certification process

SilverStone SFX 550W

Top side

Power specifications label