CYBENETICS LTD Syrou 6, Latsia, 2231, Nicosia Cyprus
SeaSonic Prime Platinum 650W
Serial NumberR1701TA101410009
Lab ID197
  • Report:
  • Receipt Date: Oct 8, 2018
  • Test Date: Oct 14, 2018
  • Report Date: Oct 17, 2018
115V230V
Efficiency Rating
115V230V
Noise Rating
Aristeidis Bitziopoulos, Laboratory General Manager

General Information

DUT Information

BrandSeasonic
Manufacturer (OEM)Seasonic
SeriesPrime Platinum
Model NumberSSR-650PD
Serial NumberR1701TA101410009
DUT Notes

DUT Specifications

Rated Voltage (Vrms)100-240
Rated Current (Arms)8.5-4
Rated Frequency (Hz)50-60
Rated Power (W)650
TypeATX12V
Cooling135mm Fluid Dynamic Bearing Fan
(HA13525H12F-Z)
Semi-Passive Operation✓ (selectable)
Cable DesignFully Modular

Power Specifications

Rail 3.3V 5V 12V 5VSB -12V
Max. Power Amps 20 20 54 2.5 0.3
Watts 100 648 12.5 3.6
Total Max. Power (W) 650

Test Equipment

Electronic Loads Chroma 6314A x2
63123A x6
63102A
63101A		 Chroma 63601-5 x2
Chroma 63600-2
63640-80-80 x10
63610-80-20
AC Sources Chroma 6530, Chroma 61604
Power Analyzers N4L PPA1530, N4L PPA5530
Oscilloscopes Picoscope 4444 & 3424, Keysight DSOX3024A, Rigol DS2072A
Voltmeter Keithley 2015 THD 6.5 Digit
Sound Analyzer Bruel & Kjaer 2250-L G4
Microphone Bruel & Kjaer Type 4955-A, Bruel & Kjaer Type 4189
Data Loggers Picoscope TC-08 x2, Labjack U3-HV x2
Testing Methodology Cybenetics PSU Test Protocol

Cables and Connectors

Modular Cables
Description Cable Count Connector Count (Total) Gauge
ATX connector 20+4 pin (610mm) 1 1 18-22AWG
4+4 pin EPS12V (650mm) 1 1 18AWG
6+2 pin PCIe (680mm+80mm) 2 4 18AWG
SATA (460mm+110mm+110mm+110mm) 1 4 18AWG
SATA (360mm+110mm) 1 2 18AWG
4 pin Molex (460mm+130mm+130mm) 1 3 18AWG
FDD Adapter (+110mm) 1 1 22AWG

Test Results

Temperature & Compliance Info

Temperature Range (°C /°F)30-32 / 86-89.6
ErP Lot 3/6 Ready✓
(EU) No 617/2013 Compliance✓

Performance Summary 115V

Hold-Up Time & Power Ok Signal

Hold-Up Time (ms)21.2
AC Loss to PWR_OK Hold Up Time (ms)16.5
PWR_OK Inactive to DC Loss Delay (ms)4.7

Vampire Power

Graphs 115V

INFO

This graph is generated by the PPA Standby Power Analysis software which takes full control of the power analyzer during the whole procedure. This application features all of the EN50564 & IEC62301 test limits for standby power software testing.

Efficiency Graph

115V

INFO

This graph depicts the PSU`s efficiency throughout its entire operational range. For the generation of the efficiency and noise graphs we set our loaders to auto mode through our custom-made software before trying thousands of possible load combinations.

Noise Graph

115V

INFO

The PSU`s noise in its entire operational range and under 30-32 °C ambient is depicted in this graph. The X axis represents the load on the +12V rail(s) while the Y axis is the load on the minor rails.

Indicative Performance

Efficiency under high ambient temperature

INFO

The PSU`s efficiency under high ambient temperatures with 115V and 230V input. For this graph the results of the 10-110% load regulation table are used.

5VSB Efficiency

INFO

This graph depicts the efficiency levels of the 5VSB rail with 115V and 230V input.

5VSB Efficiency (ERP LOT 3/6 & CEC) 115V

Test # 5VSB DC/AC (Watts) Efficiency PF/AC Volts
1 0.042A 0.215 66.154% 0.036
5.125V 0.325 115.10V
2 0.087A 0.448 73.443% 0.066
5.123V 0.610 115.10V
3 0.542A 2.766 80.430% 0.278
5.100V 3.439 115.09V
4 1.002A 5.089 80.688% 0.372
5.077V 6.307 115.09V
5 1.502A 7.590 80.925% 0.422
5.054V 9.379 115.09V
6 2.502A 12.524 79.715% 0.471
5.006V 15.711 115.09V

Supplementary Tests (For Reference)

Typical Load Tests 115V

Test # 12V 5V 3.3V 5VSB DC/AC (Watts) Efficiency Fan Speed (RPM) PSU Noise (dB[A]) Temps (In/Out) PF/AC Volts
1 3.563A 2.005A 1.979A 0.986A 64.809 86.765% 660 23.8 38.05°C 0.956
12.128V 4.991V 3.332V 5.066V 74.695 40.86°C 115.10V
2 8.157A 3.001A 2.968A 1.186A 129.777 90.585% 660 23.8 38.30°C 0.985
12.128V 4.990V 3.331V 5.049V 143.266 41.29°C 115.10V
3 13.096A 3.508A 3.477A 1.390A 194.901 91.733% 660 23.8 38.69°C 0.993
12.128V 4.989V 3.329V 5.033V 212.466 41.86°C 115.10V
4 18.023A 4.009A 3.962A 1.593A 259.756 91.962% 812 26.7 39.17°C 0.996
12.128V 4.988V 3.328V 5.016V 282.461 42.53°C 115.10V
5 22.611A 5.009A 4.958A 1.800A 324.691 91.627% 1172 34.8 39.60°C 0.993
12.128V 4.986V 3.327V 4.997V 354.360 43.29°C 115.09V
6 27.202A 6.016A 5.951A 2.006A 389.673 91.096% 1650 46.1 40.54°C 0.990
12.128V 4.985V 3.325V 4.980V 427.762 44.59°C 115.08V
7 31.790A 7.020A 6.946A 2.215A 454.609 90.434% 1975 48.5 41.37°C 0.991
12.128V 4.983V 3.324V 4.962V 502.695 45.84°C 115.07V
8 36.378A 8.034A 7.939A 2.425A 519.620 89.836% 2123 51.2 42.15°C 0.992
12.129V 4.981V 3.323V 4.945V 578.409 47.38°C 115.07V
9 41.390A 8.532A 8.455A 2.428A 584.635 89.363% 2123 51.2 43.04°C 0.992
12.130V 4.980V 3.323V 4.938V 654.224 48.53°C 115.07V
10 46.352A 9.048A 8.939A 2.534A 649.510 88.763% 2123 51.2 44.14°C 0.993
12.131V 4.978V 3.321V 4.928V 731.732 50.48°C 115.07V
11 51.682A 9.050A 8.942A 2.537A 714.374 87.947% 2123 51.2 46.09°C 0.994
12.135V 4.977V 3.320V 4.921V 812.277 52.73°C 115.07V
CL1 0.101A 12.012A 12.004A 0.005A 101.225 85.043% 2115 50.7 44.19°C 0.976
12.135V 4.990V 3.335V 5.107V 119.028 47.40°C 115.10V
CL2 53.966A 1.003A 1.003A 1.002A 668.239 88.897% 2123 51.2 44.24°C 0.993
12.135V 4.985V 3.322V 5.019V 751.697 50.04°C 115.08V

The results above are not used in the certification process

Light Load Tests 115V

Test # 12V 5V 3.3V 5VSB DC/AC (Watts) Efficiency Fan Speed (RPM) PSU Noise (dB[A]) PF/AC Volts
1 1.206A 0.501A 0.476A 0.196A 19.720 74.373% 0 <6.0 0.810
12.127V 4.999V 3.335V 5.113V 26.515 115.10V
2 2.433A 1.000A 0.989A 0.391A 39.796 83.652% 0 <6.0 0.911
12.129V 4.996V 3.333V 5.099V 47.573 115.10V
3 3.667A 1.497A 1.499A 0.586A 59.926 86.605% 660 23.8 0.951
12.129V 4.991V 3.332V 5.088V 69.195 115.10V
4 4.884A 2.005A 1.978A 0.785A 79.813 88.298% 660 23.8 0.965
12.128V 4.991V 3.331V 5.076V 90.390 115.10V

The results above are not used in the certification process

Ripple Measurements 115V

Test 12V 5V 3.3V 5VSB Pass/Fail
10% Load 8.0 mV 5.2 mV 5.9 mV 7.0 mV Pass
20% Load 12.0 mV 5.0 mV 6.3 mV 7.4 mV Pass
30% Load 14.6 mV 4.7 mV 6.4 mV 8.6 mV Pass
40% Load 17.7 mV 4.3 mV 5.2 mV 8.8 mV Pass
50% Load 20.5 mV 4.6 mV 5.3 mV 10.1 mV Pass
60% Load 20.7 mV 4.9 mV 5.9 mV 12.0 mV Pass
70% Load 19.7 mV 5.2 mV 6.3 mV 13.9 mV Pass
80% Load 21.0 mV 5.8 mV 7.7 mV 15.6 mV Pass
90% Load 24.0 mV 6.6 mV 8.2 mV 16.8 mV Pass
100% Load 28.3 mV 7.1 mV 9.2 mV 19.4 mV Pass
110% Load 30.8 mV 7.1 mV 9.7 mV 21.6 mV Pass
Crossload 1 11.5 mV 7.6 mV 9.5 mV 6.2 mV Pass
Crossload 2 28.1 mV 5.4 mV 6.6 mV 15.7 mV Pass

The results above are not used in the certification process

SeaSonic Prime Platinum 650W

Top side
Power specifications label
All data and graphs included in this test report can be used by any individual on the following conditions:
› It should be mentioned that the test results are provided by Cybenetics
› The link to the original test results document should be provided in any case
Cybenetics offers the ETA and Lambda voluntary certification programs, through which the efficient and silent power supplies are promoted
CYBENETICS LTD Syrou 6, Latsia, 2231, Nicosia Cyprus
www.cybenetics.com - info@cybenetics.com