CYBENETICS LTD Syrou 6, Latsia, 2231, Nicosia Cyprus
SeaSonic Prime Platinum 1000W
Serial NumberR1701TA101440009
Lab ID194
  • Report:
  • Receipt Date: Dec 5, 2018
  • Test Date: Dec 8, 2018
  • Report Date: Dec 10, 2018
115V230V
Efficiency Rating
115V230V
Noise Rating
Aristeidis Bitziopoulos, Laboratory General Manager

General Information

DUT Information

BrandSeasonic
Manufacturer (OEM)Seasonic
SeriesPrime Platinum
Model NumberSSR-1000PD
Serial NumberR1701TA101440009
DUT Notes

DUT Specifications

Rated Voltage (Vrms)100-240
Rated Current (Arms)13-6.5
Rated Frequency (Hz)50-60
Rated Power (W)1000
TypeATX12V
Cooling135mm Fluid Dynamic Bearing Fan
(HA13525H12F-Z)
Semi-Passive Operation✓ (selectable)
Cable DesignFully Modular

Power Specifications

Rail 3.3V 5V 12V 5VSB -12V
Max. Power Amps 25 25 83 3 0.3
Watts 125 996 15 3.6
Total Max. Power (W) 1000

Test Equipment

Electronic Loads Chroma 6314A x2
63123A x6
63102A
63101A		 Chroma 63601-5 x2
Chroma 63600-2
63640-80-80 x10
63610-80-20
AC Sources Chroma 6530, Chroma 61604
Power Analyzers N4L PPA1530, N4L PPA5530
Oscilloscopes Picoscope 4444 & 3424, Keysight DSOX3024A, Rigol DS2072A
Voltmeter Keithley 2015 THD 6.5 Digit
Sound Analyzer Bruel & Kjaer 2250-L G4
Microphone Bruel & Kjaer Type 4955-A, Bruel & Kjaer Type 4189
Data Loggers Picoscope TC-08 x2, Labjack U3-HV x2
Testing Methodology Cybenetics PSU Test Protocol

Cables and Connectors

Modular Cables
Description Cable Count Connector Count (Total) Gauge In Cable Capacitors
ATX connector 20+4 pin (610mm) 1 1 18-22AWG No
4+4 pin EPS12V (650mm) 2 2 18AWG No
6+2 pin PCIe (680mm+80mm) 4 8 18AWG No
SATA (450mm+110mm+110mm+110mm) 3 12 18AWG No
4 pin Molex (450mm+120mm+120mm) 1 3 18AWG No
4 pin Molex (350mm+120mm) 1 2 18AWG No
4 pin Molex to SATA 3.3V Adapter (140mm+140mm) 1 1 18AWG No
AC Power Cord (1360mm) - C13 coupler 1 1 18AWG -

Test Results

Temperature & Compliance Info

Temperature Range (°C /°F)30-32 / 86-89.6
ErP Lot 3/6 Ready✓
(EU) No 617/2013 Compliance✓

Performance Summary 115V

Hold-Up Time & Power Ok Signal

Hold-Up Time (ms)25.3
AC Loss to PWR_OK Hold Up Time (ms)23.8
PWR_OK Inactive to DC Loss Delay (ms)1.5

Vampire Power

Graphs 115V

INFO

This graph is generated by the PPA Standby Power Analysis software which takes full control of the power analyzer during the whole procedure. This application features all of the EN50564 & IEC62301 test limits for standby power software testing.

Efficiency Graph

115V

INFO

This graph depicts the PSU`s efficiency throughout its entire operational range. For the generation of the efficiency and noise graphs we set our loaders to auto mode through our custom-made software before trying thousands of possible load combinations.

Noise Graph

115V

INFO

The PSU`s noise in its entire operational range and under 30-32 °C ambient is depicted in this graph. The X axis represents the load on the +12V rail(s) while the Y axis is the load on the minor rails.

Indicative Performance

Efficiency under high ambient temperature

INFO

The PSU`s efficiency under high ambient temperatures with 115V and 230V input. For this graph the results of the 10-110% load regulation table are used.

5VSB Efficiency

INFO

This graph depicts the efficiency levels of the 5VSB rail with 115V and 230V input.

5VSB Efficiency (ERP LOT 3/6 & CEC) 115V

Test # 5VSB DC/AC (Watts) Efficiency PF/AC Volts
1 0.042A 0.209 65.723% 0.035
5.003V 0.318 115.10V
2 0.087A 0.437 73.077% 0.065
5.001V 0.598 115.11V
3 0.542A 2.701 80.172% 0.274
4.982V 3.369 115.10V
4 1.002A 4.971 79.984% 0.368
4.961V 6.215 115.10V
5 1.502A 7.419 80.249% 0.418
4.940V 9.245 115.10V
6 3.001A 14.643 78.972% 0.484
4.879V 18.542 115.10V

Supplementary Tests (For Reference)

Typical Load Tests 115V

Test # 12V 5V 3.3V 5VSB DC/AC (Watts) Efficiency Fan Speed (RPM) PSU Noise (dB[A]) Temps (In/Out) PF/AC Volts
1 6.377A 1.986A 1.983A 0.996A 99.827 90.279% 685 25.4 38.13°C 0.980
12.274V 5.026V 3.323V 5.004V 110.576 43.76°C 115.08V
2 13.758A 2.980A 2.979A 1.200A 199.715 92.514% 685 25.4 38.39°C 0.986
12.273V 5.024V 3.321V 4.999V 215.876 44.25°C 115.07V
3 21.496A 3.487A 3.490A 1.401A 299.893 93.017% 685 25.4 38.67°C 0.987
12.272V 5.023V 3.319V 4.993V 322.407 44.89°C 115.06V
4 29.219A 3.985A 3.976A 1.601A 399.735 92.954% 726 26.0 38.88°C 0.991
12.271V 5.021V 3.318V 4.989V 430.036 45.72°C 115.06V
5 36.609A 4.978A 4.974A 1.806A 499.670 92.420% 1057 32.2 39.47°C 0.994
12.270V 5.019V 3.316V 4.983V 540.650 46.50°C 115.06V
6 44.002A 5.979A 5.973A 2.006A 599.636 91.504% 1650 46.1 40.67°C 0.996
12.269V 5.017V 3.314V 4.977V 655.308 47.91°C 115.07V
7 51.390A 6.981A 6.971A 2.211A 699.596 90.653% 2043 48.8 41.42°C 0.997
12.269V 5.015V 3.312V 4.972V 771.727 49.20°C 115.07V
8 58.771A 7.978A 7.971A 2.415A 799.511 90.004% 2132 51.7 42.70°C 0.997
12.270V 5.014V 3.311V 4.968V 888.306 50.96°C 115.08V
9 66.566A 8.480A 8.487A 2.415A 899.481 89.397% 2132 51.7 43.81°C 0.998
12.272V 5.012V 3.309V 4.968V 1006.166 52.51°C 115.08V
10 74.112A 8.987A 8.976A 3.028A 999.295 88.601% 2132 51.7 45.15°C 0.998
12.273V 5.011V 3.308V 4.951V 1127.855 54.27°C 115.09V
11 82.232A 8.988A 8.979A 3.029A 1099.197 87.708% 2140 52.5 46.59°C 0.998
12.276V 5.010V 3.307V 4.950V 1253.253 56.44°C 115.07V
CL1 0.100A 15.018A 15.004A 0.005A 126.413 84.919% 2123 51.2 43.62°C 0.988
12.292V 5.020V 3.317V 5.044V 148.863 49.62°C 115.09V
CL2 82.940A 1.002A 1.004A 1.002A 1030.862 88.641% 2132 51.7 44.53°C 0.998
12.268V 5.016V 3.312V 4.993V 1162.961 52.05°C 115.10V

The results above are not used in the certification process

Light Load Tests 115V

Test # 12V 5V 3.3V 5VSB DC/AC (Watts) Efficiency Fan Speed (RPM) PSU Noise (dB[A]) PF/AC Volts
1 1.191A 0.489A 0.480A 0.196A 19.655 74.215% 0 <6.0 0.819
12.270V 5.031V 3.327V 5.027V 26.484 115.08V
2 2.409A 0.989A 0.991A 0.396A 39.818 83.875% 0 <6.0 0.917
12.273V 5.027V 3.323V 5.018V 47.473 115.08V
3 3.620A 1.486A 1.502A 0.596A 59.889 87.872% 0 <6.0 0.953
12.276V 5.028V 3.323V 5.013V 68.155 115.08V
4 4.827A 1.985A 1.985A 0.796A 79.808 88.937% 685 25.4 0.970
12.274V 5.027V 3.323V 5.009V 89.735 115.08V

The results above are not used in the certification process

Ripple Measurements 115V

Test12V 5V 3.3V5VSB Pass/Fail
10% Load 8.0 mV 3.3 mV 4.2 mV 5.5 mV Pass
20% Load 9.0 mV 4.2 mV 4.9 mV 6.8 mV Pass
30% Load 11.3 mV 4.5 mV 5.8 mV 7.5 mV Pass
40% Load 12.0 mV 5.1 mV 6.5 mV 8.0 mV Pass
50% Load 13.4 mV 5.6 mV 6.8 mV 9.5 mV Pass
60% Load 13.8 mV 6.2 mV 7.6 mV 10.7 mV Pass
70% Load 14.1 mV 6.7 mV 7.8 mV 11.4 mV Pass
80% Load 15.7 mV 6.9 mV 8.2 mV 13.4 mV Pass
90% Load 18.2 mV 7.2 mV 8.7 mV 14.6 mV Pass
100% Load 19.5 mV 7.9 mV 9.8 mV 16.2 mV Pass
110% Load 20.1 mV 8.3 mV 10.5 mV 18.0 mV Pass
Crossload 1 12.4 mV 4.7 mV 8.3 mV 6.5 mV Pass
Crossload 2 21.2 mV 5.9 mV 10.2 mV 14.2 mV Pass

The results above are not used in the certification process

SeaSonic Prime Platinum 1000W

Top side
Power specifications label
All data and graphs included in this test report can be used by any individual on the following conditions:
› It should be mentioned that the test results are provided by Cybenetics
› The link to the original test results document should be provided in any case
Cybenetics offers the ETA and Lambda voluntary certification programs, through which the efficient and silent power supplies are promoted
CYBENETICS LTD Syrou 6, Latsia, 2231, Nicosia Cyprus
www.cybenetics.com - info@cybenetics.com