General Data | - |
Manufacturer (OEM) | Wentai |
PCB Type | Double Sided |
Primary Side | - |
Transient Filter | 4x Y caps, 3x X caps, 2x CM chokes, 1x MOV, 1x Discharge IC |
Inrush Protection | NTC Thermistor (SCK-105) & Relay |
Bridge Rectifier(s) (Standby Mode) | 5x GBJ25JL (600V, 25A @ 115°C) |
Totem-Pole PFC MODFETs (HEMTs) | 2x Transform TP65H050WS GaN FET (650V, 25A @ 100°C, 0.06Ohm) & 1x SPN5003 FET (for reduced no-load consumption) |
Totem-Pole PFC Driver | On Semiconductor NCP81071 |
Totem-pole PFC MOSFETs | 4x HCA60R040 (600V, 68.8A, 0.04Ohm) |
Hold-up Cap(s) | 5x Nippon Chemi-Con (400V, 470uF, 2,000h @ 105°C, KMW) |
Main Switchers | 4x Alpha & Omega AOTF29S50 (500V, 18A @ 100°C, 0.4Ohm) |
IC Driver(s) | 2x Texas Instruments UCC21520 |
Primary DSC | 2x Texas Instruments UCD3138A |
Topology | Primary side: Digital Totem-Pole Bridgeless PFC, Full-Bridge & LLC converter Secondary side: Synchronous Rectification & Analogue Controlled DC-DC converters |
Secondary Side | - |
+12V MOSFETs | unknown number of FETs |
5V & 3.3V | DC-DC Converters: 8x AOM034N030 (25V, 97A @ 100°C, 1.4mOhm) PWM Controller: ANPEC APW7159C |
Filtering Capacitors | Electrolytic: 7x Nippon Chemi-Con (4-10,000h @ 105°C, KY), 2x Nippon Chemi-Con (4-10,000h @ 105°C, KYA), 2x Nippon Chemi-Con (105°C, W) Polymer: Nippon Chemi-Con, NIC |
Supervisor IC | Weltrend WT7502 (OVP, UVP, SCP, PG) |
Fan Model | Crown AGE14025B12U (140mm, 12V, 1.02A, Ball Bearing Fan) |
5VSB Circuit | - |
Rectifier | 2x PS1045L SBR (45V, 10A) & 1x KEC KF5N65D FET (650V, 2.7A @ 100°C, 1.75Ohm) |
Standby PWM Controller | On-Bright OB5282CP |