CYBENETICS LTD Syrou 6, Latsia, 2231, Nicosia Cyprus
Thermaltake Toughpower SFX 600W
Serial NumberPSSTP0600FPCGUSGMA000060
Lab ID142
  • Report:
  • Receipt Date: Jul 8, 2018
  • Test Date: Jul 15, 2018
  • Report Date: Jul 18, 2018
115V230V
Efficiency Rating
115V230V
Noise Rating
Aristeidis Bitziopoulos, Laboratory General Manager

General Information

DUT Information

BrandThermaltake
Manufacturer (OEM)Enhance Electronics
SeriesToughpower SFX
Model NumberSTP-0600F-G
Serial NumberPSSTP0600FPCGUSGMA000060
DUT Notes

DUT Specifications

Rated Voltage (Vrms)100-240
Rated Current (Arms)9-4.5
Rated Frequency (Hz)50-60
Rated Power (W)600
TypeSFX
Cooling80mm Double Ball-Bearing Fan
(R128015SM)
Semi-Passive Operation✓
Cable DesignFully Modular

Power Specifications

Rail 3.3V 5V 12V 5VSB -12V
Max. Power Amps 20 15 50 2.5 0.3
Watts 90 600 12.5 3.6
Total Max. Power (W) 600

Test Equipment

Electronic Loads Chroma 6314A x2
63123A x6
63102A
63101A		 Chroma 63601-5 x2
Chroma 63600-2
63640-80-80 x10
63610-80-20
AC Sources Chroma 6530, Chroma 61604
Power Analyzers N4L PPA1530, N4L PPA5530
Oscilloscopes Picoscope 4444 & 3424, Keysight DSOX3024A, Rigol DS2072A
Voltmeter Keithley 2015 THD 6.5 Digit
Sound Analyzer Bruel & Kjaer 2250-L G4
Microphone Bruel & Kjaer Type 4955-A, Bruel & Kjaer Type 4189
Data Loggers Picoscope TC-08 x2, Labjack U3-HV x2
Testing Methodology Cybenetics PSU Test Protocol

Cables and Connectors

Modular Cables
Description Cable Count Connector Count (Total) Gauge
ATX connector 20+4 pin (305mm) 1 1 18-22AWG
4+4 pin EPS12V (410mm) 1 1 18AWG
6+2 pin PCIe (410mm+150mm) 1 2 18AWG
SATA (300mm+145mm+145mm) 1 3 18AWG
4 pin Molex (310mm+145mm) / FDD (+150mm) 1 2 / 1 18-22AWG

Parts Description

General Data
Manufacturer (OEM) Enhance Electronics
Primary Side
Transient Filter 4x Y caps, 2x X caps, 2x CM chokes, 1x MOV
Inrush Protection NTC Thermistor
Bridge Rectifier(s) 1x Vishay BU1506 (600 V, 15 A @ 80 °C)
APFC MOSFETS 2x Infineon IPP50R140CP (550 V, 15 A @ 100 °C, 0.14 Ohm)
APFC Boost Diode 1x CREE C3D08060A (600 V, 8 A @ 152 °C)
Hold-up Cap(s) 1x Nippon Chemi-Con (450 V, 330 uF, 2000 h @ 105 °C, KMR)
Main Switchers 2x Infineon IPP50R140CP (550 V, 15 A @ 100 °C, 0.14 Ohm)
FET Driver 1x Silicon Labs Si8230BD
APFC Controller Champion CM6500
Switching Controller Champion CM6901
Topology Primary side: Half-Bridge & LLC Resonant Converter
Secondary side: Synchronous Rectification & DC-DC converters
Secondary Side
+12V MOSFETS 6x Inte ational Rectifier IRFH7004PbF (40 V, 164 A @ 100 °C, 1.4 mOhm)
5V & 3.3V DC-DC Converters:  2x Infineon BSC018NE2LS (25 V, 97 A @ 100 °C, 1.8 mOhm), 2x Infineon BSC050NE2LS (25 V, 37 A @ 100 °C, 5 mOhm)
PWM Controllers: 2x ANPEC APW7073
Filtering Capacitors Electrolytics: Nippon Chemi-Con (105 °C, KZE), United Chemi-Con (105 °C, LXZ) , Rubycon (105 °C, ZL), Suncon (105 °C)
Polymers: Unicon
Supervisor IC SITI PS223 (OVP, UVP, OCP, SCP, OTP )
Fan Model EverflowR128015SM (80 mm, 12 V, 0.25 A, 3000 RPM, 33.27 CFM, 31 dBA, Dual Ball-Bearing)
5VSB Circuit
Rectifier 1x STP3NK90ZFP (900 V, 1.89 A @ 100 °C, 4.8 Ohm)
 

Test Results

Temperature & Compliance Info

Temperature Range (°C /°F)30-32 / 86-89.6
ErP Lot 3/6 ReadyErP Lot 3/6 2010: ✓
ErP Lot 3/6 2013: ✓
ErP Lot 3/6 2014, CEC: Partially
(EU) No 617/2013 Compliance✓

Performance Summary 115V

Hold-Up Time & Power Ok Signal

Hold-Up Time (ms)5.8
AC Loss to PWR_OK Hold Up Time (ms)12.8
PWR_OK Inactive to DC Loss Delay (ms)-7

Vampire Power

Graphs 115V

INFO

This graph is generated by the PPA Standby Power Analysis software which takes full control of the power analyzer during the whole procedure. This application features all of the EN50564 & IEC62301 test limits for standby power software testing.

Efficiency Graph

115V

INFO

This graph depicts the PSU`s efficiency throughout its entire operational range. For the generation of the efficiency and noise graphs we set our loaders to auto mode through our custom-made software before trying thousands of possible load combinations.

Noise Graph

115V

INFO

The PSU`s noise in its entire operational range and under 30-32 °C ambient is depicted in this graph. The X axis represents the load on the +12V rail(s) while the Y axis is the load on the minor rails.

Indicative Performance

Efficiency under high ambient temperature

INFO

The PSU`s efficiency under high ambient temperatures with 115V and 230V input. For this graph the results of the 10-110% load regulation table are used.

5VSB Efficiency

INFO

This graph depicts the efficiency levels of the 5VSB rail with 115V and 230V input.

5VSB Efficiency (ERP LOT 3/6 & CEC) 115V

Test # 5VSB DC/AC (Watts) Efficiency PF/AC Volts
1 0.041A 0.209 62.763% 0.036
5.057V 0.333 115.17V
2 0.087A 0.438 69.524% 0.067
5.055V 0.630 115.17V
3 0.542A 2.732 75.847% 0.274
5.045V 3.602 115.16V
4 1.002A 5.043 76.363% 0.354
5.035V 6.604 115.16V
5 1.501A 7.543 76.184% 0.395
5.024V 9.901 115.16V
6 2.501A 12.513 75.022% 0.436
5.003V 16.679 115.16V

Supplementary Tests (For Reference)

Typical Load Tests 115V

Test # 12V 5V 3.3V 5VSB DC/AC (Watts) Efficiency Fan Speed (RPM) Fan Noise (dB[A]) Temps (In/Out) PF/AC Volts
1 3.161A 1.996A 1.984A 0.995A 59.768 80.665% 2122 33.8 38.48°C 0.964
12.080V 5.010V 3.319V 5.024V 74.094 41.34°C 115.17V
2 7.370A 2.998A 2.993A 1.196A 119.779 88.031% 2122 33.8 38.68°C 0.976
12.064V 4.999V 3.305V 5.007V 136.064 41.69°C 115.17V
3 11.941A 3.510A 3.518A 1.400A 179.867 89.318% 2245 25.9 39.13°C 0.969
12.042V 4.986V 3.293V 4.991V 201.378 42.54°C 115.17V
4 16.522A 4.023A 4.019A 1.605A 239.771 89.704% 2306 36.8 39.83°C 0.981
12.019V 4.975V 3.282V 4.977V 267.291 43.89°C 115.17V
5 20.776A 5.033A 5.047A 1.810A 299.704 89.682% 2465 36.9 40.33°C 0.987
11.997V 4.963V 3.268V 4.962V 334.187 45.17°C 115.17V
6 25.045A 6.061A 6.085A 2.020A 359.731 89.409% 2590 38.5 40.82°C 0.991
11.976V 4.951V 3.253V 4.945V 402.344 46.22°C 115.18V
7 29.328A 7.085A 7.127A 2.230A 419.655 88.964% 2777 42.2 41.91°C 0.993
11.954V 4.939V 3.239V 4.928V 471.714 48.31°C 115.18V
8 33.634A 8.118A 8.185A 2.441A 479.656 88.398% 2916 41.3 42.36°C 0.994
11.931V 4.927V 3.224V 4.909V 542.611 50.04°C 115.17V
9 38.387A 8.653A 8.746A 2.448A 539.704 87.850% 2987 41.6 43.90°C 0.995
11.908V 4.914V 3.211V 4.897V 614.346 52.27°C 115.18V
10 43.113A 9.182A 9.280A 2.557A 599.559 87.177% 3025 41.9 44.99°C 0.996
11.884V 4.903V 3.200V 4.884V 687.747 55.03°C 115.17V
11 48.259A 9.202A 9.310A 2.562A 659.464 84.442% 3025 41.9 46.42°C 0.996
11.858V 4.893V 3.190V 4.873V 780.970 59.00°C 115.17V
CL1 0.099A 11.018A 11.004A 0.004A 92.235 84.028% 3055 42.0 45.26°C 0.989
12.080V 4.987V 3.278V 5.020V 109.767 52.10°C 115.18V
CL2 49.959A 1.004A 1.003A 1.002A 606.605 87.825% 3025 41.9 45.19°C 0.996
11.879V 4.922V 3.239V 4.941V 690.698 55.31°C 115.18V

The results above are not used in the certification process

Light Load Tests 115V

Test # 12V 5V 3.3V 5VSB DC/AC (Watts) Efficiency Fan Speed (RPM) Fan Noise (dB[A]) PF/AC Volts
1 1.206A 0.492A 0.477A 0.195A 19.629 67.642% 1875 30.1 0.878
12.093V 5.020V 3.333V 5.050V 29.019 115.17V
2 2.442A 0.990A 0.991A 0.395A 39.768 76.339% 1920 30.9 0.942
12.086V 5.016V 3.327V 5.042V 52.094 115.17V
3 3.676A 1.487A 1.503A 0.596A 59.847 81.778% 2010 31.5 0.963
12.079V 5.012V 3.321V 5.034V 73.182 115.17V
4 4.899A 1.996A 1.989A 0.796A 79.772 85.112% 2100 33.1 0.972
12.080V 5.008V 3.316V 5.025V 93.726 115.17V

The results above are not used in the certification process

Ripple Measurements 115V

Test 12V 5V 3.3V 5VSB Pass/Fail
10% Load 30.0 mV 14.9 mV 11.7 mV 12.2 mV Pass
20% Load 26.9 mV 16.1 mV 11.8 mV 13.7 mV Pass
30% Load 28.7 mV 17.0 mV 11.2 mV 14.6 mV Pass
40% Load 30.9 mV 18.7 mV 11.4 mV 19.1 mV Pass
50% Load 33.4 mV 20.1 mV 12.3 mV 20.9 mV Pass
60% Load 37.6 mV 22.2 mV 13.5 mV 22.4 mV Pass
70% Load 44.7 mV 23.7 mV 14.2 mV 25.0 mV Pass
80% Load 54.3 mV 24.6 mV 16.3 mV 29.1 mV Pass
90% Load 61.5 mV 27.3 mV 17.8 mV 32.3 mV Pass
100% Load 68.0 mV 32.0 mV 22.7 mV 35.1 mV Pass
110% Load 83.9 mV 34.1 mV 24.9 mV 38.6 mV Pass
Crossload 1 30.7 mV 19.6 mV 13.9 mV 21.1 mV Pass
Crossload 2 63.4 mV 30.0 mV 21.2 mV 30.6 mV Pass

The results above are not used in the certification process

Thermaltake Toughpower SFX 600W

Top side
Power specifications label
All data and graphs included in this test report can be used by any individual on the following conditions:
› It should be mentioned that the test results are provided by Cybenetics
› The link to the original test results document should be provided in any case
Cybenetics offers the ETA and Lambda voluntary certification programs, through which the efficient and silent power supplies are promoted
CYBENETICS LTD Syrou 6, Latsia, 2231, Nicosia Cyprus
www.cybenetics.com - info@cybenetics.com