
Pure Power 13M 1200W
| Electronic Loads | Chroma 63601-5 x2 Chroma 63600-2 Chroma 63640-80-80 x10 Chroma 63610-80-20 |
| AC Sources | Chroma 6530, APM SP300VAC4000W-P, GW Instek ASR-3500 |
| Power Analyzers | Rohde & Schwarz HMC8015 & NPA701 |
| Oscilloscopes | Picoscope 4444, Siglent SDS2104X PLUS |
| Sound Analyzer | Bruel & Kjaer 2270 G4 |
| Microphone | Bruel & Kjaer Type 4955-A |
| Temperature Logger | Picoscope TC-08 |
| Tachometer | UNI-T UT372 |
| Multimeters | Keysight 34465A |
| EMI Analyzer | TekBox TBMR-110M-EU |
| Isolation Transformer | 4kVA |
| UPS | FSP Champ Tower 3kVA, CyberPower OLS3000E 3kVA |
| Testing Methodology | Cybenetics PSU Test Protocol |
| Voltage | 115V | 230V |
|---|---|---|
| Efficiency (>1450 Load Combinations) | 89.708% | 91.903% |
| Efficiency Graphs | ![]() | ![]() |
| Average PF (>1450 Load Combinations) | 0.985 | 0.955 |
| 12V Step | - | |
| 5V/3.3V Step | - | |
| Standby Power Consumption | 0.0230W | 0.1111W |
| ErP Lot 3/6 Ready | ✓ | |
| (EU) No 617/2013 Compliance | ✓ | |
| Average Efficiency VSB | 82.579% | 81.411% |
| Conducted Emissions EN55032 & CISPR 32 (48W) | Passed | |
| Conducted Emissions Graphs | ![]() | ![]() |
| Voltage | 115V | 230V |
|---|---|---|
| Noise Rating (>1450 Load Combinations) | 21.03dBA | 22.69dBA |
| Noise Graphs | ![]() | ![]() |
| Efficiency With 10W (≤500W) or 2% (>500W) Load | 75.474% |
| Hold Up Time | 19.80ms |
| Power OK | 16.80ms |
| Power OK to DC Loss | 3.00ms |
| Test\Rail | +12V | 5V | 3.3V | 5VSB |
| 100ms | 11.468 | 4.934 | 3.193 | 4.876 |
| 10ms | 11.344 | 4.916 | 3.174 | 4.855 |
| 1ms | 11.902 | 5.000 | 3.264 | 4.933 |
| 0.1ms | 11.599 | 4.955 | 3.215 | 4.896 |
| Product Identification Details | |
| Brand | be quiet! |
| Model | Pure Power 13M 1200W |
| OEM | Channel Well Technology |
| Serial Number | 029EUL6070000044 |
| Product Specifications | |
| Manufacturer | |
| Rated Voltage (Vrms) | 110-240 |
| Rated Current (Arms) | 7.5-15 |
| Rated Frequency (Hz) | 50-60 |
| Rated Power (W) | 1200 |
| Operating Temperature (Continuous Full Load) (°C) | 0 - 50 |
| Type | ATX12V |
| Cable Design | Fully Modular |
| Warranty | 10 Years |
| Cybenetics | |
| Dimensions (W x H x D) | 150 x 85 x 160mm |
| Weight | 1.80 kg (3.97 lb) |
| Cooling | 120mm Rifle Bearing Fan (BQ QF2-12025-HS) |
| Semi-Passive Operation | ✓ |
| Cybenetics Testing Information | |
| Lab ID | BQ12003127 |
| Date of receipt | Jan 9, 2026 |
| Testing Date | Jan 16, 2026 |
| Report Issued Date | Jan 20, 2026 |
| Engineer Name | Georgios Theodoros Sarimpalas |
| Authorized By the Laboratory Technical Manager | Aristeidis Bitziopoulos |
| Signature | ![]() |
| Modular Cables | ||||
| Description | Cable Count | Connector Count (Total) | Gauge | Cable Type |
| ATX connector 20+4 pin (550mm) | 1 | 1 | 16-18AWG | Tinned Copper |
| 4+4 pin EPS12V (650mm) | 1 | 1 | 16AWG | Tinned Copper |
| 8 pin EPS12V (650mm) | 1 | 1 | 16AWG | Tinned Copper |
| 2x 6+2 pin PCIe (600mm) | 2 | 2 | 16AWG | Tinned Copper |
| 6+2 pin PCIe (500mm+150mm) | 1 | 2 | 16AWG | Tinned Copper |
| 12+4 pin PCIe (600mm) (600W) | 1 | 1 | 16-24AWG | Tinned Copper |
| SATA (500mm+150mm+150mm+150mm) | 1 | 4 | 18AWG | Tinned Copper |
| SATA (500mm+150mm) / 4-pin Molex (+150mm+150mm) | 1 | 2 / 2 | 18AWG | Tinned Copper |
| AC Power Cord (1400mm) - C13 coupler | 1 | 1 | 18AWG | - |
| Over Power Protection | ✓ |
| Over Current (+12V) Protection | ✓ |
| Over Temperature Protection | ✗ |
| Short Circuit Protection | ✓ |
| Surge Protection | ✓ |
| Inrush Current Protection | ✓ |
| Fan Failure Protection | ✗ |
| General Data | |
| Manufacturer (OEM) | CWT |
| PCB Type | Double-Sided |
| Primary Side | |
| Transient Filter | 6x Y caps, 2x X caps, 2x CM chokes, 1x MOV |
| Inrush Protection | NTC Thermistor SCK-207R0 (7 Ohm @ 25°C) & Relay |
| Bridge Rectifier(s) | 2x Yangzhou GBJL2506 (600V, 25A @ 104°C) |
| APFC MOSFETs | 3x Vishay SiHA105N60EF (600V, 8A @100°C, Rds(on): 0.102Ohm) |
| APFC Boost Diode | Vishay 3C16ET07T (650V, 16A @ 142°C) |
| Bulk Cap(s) | Teapo (420V, 1100uF, 2,000h @ 85°C, LH) |
| Main Switchers | 2x Infineon IPA60R099P6 (600V, 37.9A @ 25°C, Rds(on): 0.099Ohm) |
| APFC Controller | |
| Resonant Controller | Champion CM6901X |
| Topology | Primary side: APFC, Half-Bridge & LLC Resonant converter Secondary side: Synchronous Rectification & DC-DC converters |
| Secondary Side | |
| +12V MOSFETs | 8x CMR0130N045NS |
| 5V & 3.3V | DC-DC Converters: 4x UBIQ QN3107M6N (30V, 70A @ 100°C, Rds(on): 2.6mOhm) |
| Filtering Capacitors | Electrolytic: |
| MCU/Fan Controller | Nuvoton MS51FB9AE |
| Fan Model | BQ QF2-12025-HS (120mm, 12V, 0.3A, Rifle Bearing Fan) |
| 5VSB | |
| Rectifier | Donke Semiconductor DK5V45R10V (45V, 10mOhm) |
| Standby PWM Controller | On-Bright OB2365T |
| Photos | ![]() | ![]() |
| Top side | Power specifications label |
F.1 General Statement
Measurement uncertainty associated with the reported results was evaluated and estimated in accordance with JCGM 100:2008 (Guide to the Expression of Uncertainty in Measurement — GUM) and ISO/IEC 17025:2017, Clauses 7.6 and 7.2.
The uncertainty budget accounts for all significant identified contributors arising from the measurement process, instrumentation, test conditions, and operator interaction.
The reported expanded uncertainty U is obtained by multiplying the combined standard uncertainty uc by a coverage factor k = 2, corresponding to a confidence level of approximately 95 %, assuming a normal probability distribution.
Unless otherwise stated, the reported uncertainty applies only to the specific measurements performed and does not include long-term drift, aging effects, or future environmental changes.
F.2 Expanded Measurement Uncertainty by Measurement Type
| Measurement | Expanded Uncertainty U (k=2, norm) |
| Efficiency | ±0.18% |
| Timings | ±0.48ms |
| Power Excursions (Transient Response) | ±0.1V |
| Conducted EMI Emissions (150 kHz – 30 MHz) | ±2.35 dBμV |
| Noise Output | ±1.23 dB |